Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

This repair might be needed in the event of a defective LCD screen.

  1. Press the ejection  button on the lower left corner of the face plate.
    • Press the ejection button on the lower left corner of the face plate.

  2. Remove the face plate by pulling upwards and in the direction of the ejection button. Remove the face plate by pulling upwards and in the direction of the ejection button.
    • Remove the face plate by pulling upwards and in the direction of the ejection button.

  3. Remove the three 7.5mm Phillips #1 screws.
    • Remove the three 7.5mm Phillips #1 screws.

  4. Separate the two halves of the housing by prying along the length of the device with a plastic opening tool. Separate the two halves of the housing by prying along the length of the device with a plastic opening tool.
    • Separate the two halves of the housing by prying along the length of the device with a plastic opening tool.

  5. Remove the motherboard from the housing.
    • Remove the motherboard from the housing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Waldon

Membre depuis le 05/07/2018

265 Réputation

3 tutoriels rédigés

Équipe

IUPUI, Team S2-G4, Harley Summer 2018 Membre de l'équipe IUPUI, Team S2-G4, Harley Summer 2018

IUPUI-HARLEY-SU18S2G4

3 membres

3 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 84