Aller au contenu principal

Introduction

This repair guide will demonstrate a way to remove and replace the handle on a Keurig K40.

Pièces

Aucune pièce spécifiée.

  1. Unscrew one of the 2mm screws on the handle using a T15 screw head. Keep a firm grip on the device so it does not shift out of place.
    • Unscrew one of the 2mm screws on the handle using a T15 screw head. Keep a firm grip on the device so it does not shift out of place.

  2. Flip the Keurig over and unscrew the other 2mm screw using the same screw head. Keep a firm grip on the device to prevent it from shifting or falling.
    • Flip the Keurig over and unscrew the other 2mm screw using the same screw head. Keep a firm grip on the device to prevent it from shifting or falling.

  3. Remove the lever by pulling it away from the Keurig.
    • Remove the lever by pulling it away from the Keurig.

    • Replace a new handle by putting the Keurig back together the same way it was taken apart.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Andrew Bornemann

Membre depuis le 08/02/2016

452 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team 6-1, Eyestone Spring 2016 Membre de l'équipe USF Tampa, Team 6-1, Eyestone Spring 2016

USFT-EYESTONE-S16S6G1

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 1,426