Introduction

Remove the back case from your Kindle Fire to access its internal components.

Wedge a plastic opening tool into the lower right corner of the Kindle Fire.
  • Wedge a plastic opening tool into the lower right corner of the Kindle Fire.

  • Pry the case apart and run the plastic opening tool along the perimeter of the Kindle Fire to release the clips securing the case halves to each other.

  • If you are having extreme difficulty inserting the plastic opening tool, carefully use a metal spudger to undo the first clip, then switch back to the opening tool to avoid scratching your case.

    • It is helpful to pry the bottom of the Kindle Fire away (and out from the side) from the top part. Exerting too much force attempting to split the two without pulling away can cause the tabs on the inside to crack.

Where can I buy a battery for my kindle fire

nannyto2 - Réponse

Try EBay or Amazon. make sure you get the right battery for your Kindle , one is for a Kindle HD and the older version........both are 7 ".

vvenona1954 - Réponse

Once you have freed all the plastic clips, pull the back case off the Kindle Fire.
  • Once you have freed all the plastic clips, pull the back case off the Kindle Fire.

Conclusion

To reassemble your device, follow these instructions in reverse order.

13 autre(s) ont terminé cette réparation.

Phillip Takahashi

Membre depuis le 22/08/2011

73 724 Réputation

85 tutoriels rédigés

Simple to follow instructions .

Eric Rester - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 14

30 derniers jours : 85

Total : 11,675