Aller au contenu principal
  1. Open up the device by using a plastic opening tool in order to avoid damaging the device. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.
    • Open up the device by using a plastic opening tool in order to avoid damaging the device.

    • To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.

  2. Locate the battery's power ribbon. Use nylon spudger to disconnect the ribbon from the mother board.
    • Locate the battery's power ribbon.

    • Use nylon spudger to disconnect the ribbon from the mother board.

  3. Peel battery away. Battery is glued and may cause permanent damage if bent.
    • Peel battery away.

    • Battery is glued and may cause permanent damage if bent.

Conclusion

To reassemble your device, follow these instructions in reverse order.

7 autres ont terminé cette réparation.

aaa

Membre depuis le 06/10/2016

717 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team 2-3, Sullivan Fall 2016 Membre de l'équipe USF Tampa, Team 2-3, Sullivan Fall 2016

USFT-SULLIVAN-F16S2G3

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 17

30 derniers jours : 78

Total : 5,562