Réparez vos affaires Rejoignez la communauté Boutique

KitchenAid KHM512ER Power Cord Replacement

Introduction

Is your power cord frayed or damaged? Follow this guide to replace it.

Ce dont vous avez besoin

  1. KitchenAid KHM512ER Power Cord Replacement, Power Cord: étape 1, image 1 de 2 KitchenAid KHM512ER Power Cord Replacement, Power Cord: étape 1, image 2 de 2

    • Insert the back of a plastic opening tool into one of the beater holes

    • Apply force to pull the circular plastic part off.

    • If necessary, use the other side of the plastic opening tool to pry the circular plastic part off.

    Traduire

  2. KitchenAid KHM512ER Power Cord Replacement: étape 2, image 1 de 3 KitchenAid KHM512ER Power Cord Replacement: étape 2, image 2 de 3 KitchenAid KHM512ER Power Cord Replacement: étape 2, image 3 de 3

    • Use a plastic opening tool to remove the speed knob.

    • Pop up the panel with a plastic opening tool.

    • Use a plastic opening tool to pry the white plastic switch assembly out.

    Traduire

  4. KitchenAid KHM512ER Power Cord Replacement: étape 3, image 1 de 2 KitchenAid KHM512ER Power Cord Replacement: étape 3, image 2 de 2

    • Use a Phillips 2 screwdriver to remove the two 20.0mm screws that hold the bottom plastic piece.

    • Your screwdriver may not be long or narrow enough to reach the screws in these holes. If that's the case, use another screwdriver.

    • Remove the bottom plastic piece using a plastic opening tool.

    Traduire

  5. KitchenAid KHM512ER Power Cord Replacement: étape 4, image 1 de 3 KitchenAid KHM512ER Power Cord Replacement: étape 4, image 2 de 3 KitchenAid KHM512ER Power Cord Replacement: étape 4, image 3 de 3

    • Using a Phillips 2 screwdriver, remove the three 20.0mm screws holding the motor assembly in place.

    • Use your hands to remove the motor assembly and circuit board.

    Traduire

  6. KitchenAid KHM512ER Power Cord Replacement: étape 5, image 1 de 3 KitchenAid KHM512ER Power Cord Replacement: étape 5, image 2 de 3 KitchenAid KHM512ER Power Cord Replacement: étape 5, image 3 de 3

    • Firmly grip the circuit board, and using pliers, remove the black and white power cord connectors from the circuit board.

    • Some force may be required. Be careful not to cut yourself on any electrical components.

    Traduire

  7. KitchenAid KHM512ER Power Cord Replacement: étape 6, image 1 de 3 KitchenAid KHM512ER Power Cord Replacement: étape 6, image 2 de 3 KitchenAid KHM512ER Power Cord Replacement: étape 6, image 3 de 3

    • Using a plastic opening tool, remove the white plastic clip on the inside of the bottom plastic piece.

    • Once it's loose, remove it with your fingers.

    • Pull the power cord through the hole.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Brad Daniels

Membre depuis le 02/10/16

561 Réputation

3 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

USF Tampa, Team 2-3, Sullivan Spring 2016 Membre de l'équipe USF Tampa, Team 2-3, Sullivan Spring 2016

USFT-SULLIVAN-S16S2G3

3 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 32

Total : 3,088