Aller au contenu principal

KitchenAid KSM150PSER Carbon Brushes Replacement

Ce dont vous avez besoin

  1. KitchenAid KSM150PSER Carbon Brushes Replacement, Carbon Brushes: étape 1, image 1 de 2 KitchenAid KSM150PSER Carbon Brushes Replacement, Carbon Brushes: étape 1, image 2 de 2
    • Using a flat head screwdriver, unscrew the brush cap on each side of the mixer by turning them counter clockwise.

    • Remove brush cap by pulling it toward you.

    • The brushes are held in by springs and will fly out if removed too fast.

  2. KitchenAid KSM150PSER Carbon Brushes Replacement: étape 2, image 1 de 1
    • Remove brush by pulling it toward you.

    • One corner of the brush is flattened. You can check which way the brush is oriented by shining a flashlight inside the hole.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autres ont terminé cette réparation.

Hayley Young

Membre depuis le 12/03/16

211 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S2-G5, Livingston Winter 2018 Membre de l'équipe Cal Poly, Team S2-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G5

4 membres

10 tutoriels rédigés

Un commentaire

I’ve been procrastinating on trying to fix my KA mixer on my own…today I did it. The directions were pretty clear and the only thing wrong was that when I had previously cleaned my mixer, I put the carbon brushes in the wrong way. Once I shined a flashlight into the hole I could see where the notched corner went.

Amber Reimer - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 13

7 derniers jours : 66

30 derniers jours : 248

Total : 14,379