Introduction

If your device is not turning on, it may be the result of a faulty power cord. This guide demonstrates how to replace it.

Pièces

Aucune pièce nécessaire.

Using a Phillips #2 screwdriver, remove the 10mm screw on the back cover by rotating it counterclockwise. The back cover is now free. Remove it by pulling back and up on the cover.
  • Using a Phillips #2 screwdriver, remove the 10mm screw on the back cover by rotating it counterclockwise.

  • The back cover is now free. Remove it by pulling back and up on the cover.

Ajouter un commentaire

Using a Phillips #2 screwdriver, remove the 5mm screws holding the trimband to the top housing by rotating them counterclockwise. Pull the trimband off the housing by grabbing each side and pulling it off the front.
  • Using a Phillips #2 screwdriver, remove the 5mm screws holding the trimband to the top housing by rotating them counterclockwise.

  • Pull the trimband off the housing by grabbing each side and pulling it off the front.

Ajouter un commentaire

Using a Phillips #2 screwdriver, remove the 12mm screw holding the grounding wire in place by rotating it counterclockwise. Using pliers or tweezers, remove the connectors attached to the white and black wires.
  • Using a Phillips #2 screwdriver, remove the 12mm screw holding the grounding wire in place by rotating it counterclockwise.

  • Using pliers or tweezers, remove the connectors attached to the white and black wires.

Ajouter un commentaire

Using a screwdriver, pull the cord string relief out of the mixer by putting it behind the cord and pulling away from the mixer until it is free. Remove the cord from the mixer body.
  • Using a screwdriver, pull the cord string relief out of the mixer by putting it behind the cord and pulling away from the mixer until it is free.

  • Remove the cord from the mixer body.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Max Prohorov

Membre depuis le 24/01/2018

109 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team S2-G5, Livingston Winter 2018 Membre de l'équipe Cal Poly, Team S2-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G5

4 membres

10 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 14

Total : 56