Réparez vos affaires Communauté Boutique

KitchenAid KUDS01DJSS0 Electronic Control Board Replacement

Introduction

The KitchenAid #KUDS01DJSS dishwasher's electronic control board can be replaced using this guide. You can verify your dishwasher's model by checking inside the door.

The control board controls all of the dishwasher's functions, such as filling, washing, drying, and draining. Symptoms that match your issue can be diagnosed by viewing these Dishwasher Repairs. During the time it takes to replace the dishwasher control board, remind your family not to run the dishwasher for about 30 minutes.

Before replacing the electronic control board, make sure the power/electricity is off. Disconnect the dishwasher from any external power source before starting the process and turn off the dishwasher completely.

Ce dont vous avez besoin

  1. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement, Electronic Control Board: étape 1, image 1 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement, Electronic Control Board: étape 1, image 2 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement, Electronic Control Board: étape 1, image 3 de 3

    • Unplug the dishwasher or shut off the house circuit breaker for the dishwasher.

    • To verify that power is disconnected, make sure that the control panel doesn’t light up when you press a control button or the power button.

    Modifier

  2. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 2, image 1 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 2, image 2 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 2, image 3 de 3

    • Open the dishwasher door.

    Modifier

  3. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 3, image 1 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 3, image 2 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 3, image 3 de 3

    • Remove the four screws from each side of the dishwasher door (eight screws total).

    • Removing the three screws from each side of the dishwasher (six screws total).

    • Support the outer door panel with one hand as you remove the final two screws at the top of the dishwasher door.

    • There are total of sixteen (16) screws.

    Modifier

  4. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 4, image 1 de 2 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 4, image 2 de 2

    • Use your hands to pull off the outer door panel with the control panel.

    Modifier

  5. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 5, image 1 de 2 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 5, image 2 de 2

    • Disconnect the two white outer wires by pulling them out.

    • The two white connectors have the same size and are close together.

    • Use one hand to hold the control panel while disconnecting the electrical connections from the old board.

    Modifier

  7. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 6, image 1 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 6, image 2 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 6, image 3 de 3

    • Remove the white rectangular connector that has six colored wires connected to it.

    Modifier

  8. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 7, image 1 de 2 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 7, image 2 de 2

    • Use one hand to hold the control panel while detaching the black connector.

    • The black connector is the main connector to the control board.

    Modifier

  9. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 8, image 1 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 8, image 2 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 8, image 3 de 3

    • Detach the white and gray ribbon cable attached to the black connector.

    Modifier

  10. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 9, image 1 de 2 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 9, image 2 de 2

    • Use your hands to pull the electronic control board out the mounting slots.

    Modifier

  11. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 10, image 1 de 2 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 10, image 2 de 2

    • Push the new electronic control board into the mounting slots.

    • Slide it to the right to engage the locking tab until you hear a click.

    Modifier

  12. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 11, image 1 de 2 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 11, image 2 de 2

    • Reconnect the black connector wires to the new electronic control board.

    Modifier

  13. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 12, image 1 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 12, image 2 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 12, image 3 de 3

    • Reconnect the white rectangular connector with six wires to the new electronic control board.

    Modifier

  14. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 13, image 1 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 13, image 2 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 13, image 3 de 3

    • Reconnect the two white outer connector wires to the new electronic control board.

    Modifier

  15. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 14, image 1 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 14, image 2 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 14, image 3 de 3

    • Reinstall the outer door panel and control panel on the inner door panel and reattach the user interface control wire harness.

    • Reinstall the sixteen mounting screws.

    Modifier

  16. KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 15, image 1 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 15, image 2 de 3 KitchenAid KUDS01DJSS0 Electronic Control Board Replacement: étape 15, image 3 de 3

    • Connect the dishwasher and reset the circuit breaker for your house to restore electricity.

    • To verify that power is connected, make sure that the control panel does light up when you press a control button or the power button.

    Modifier
Ligne d'arrivée

2 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Thuan Trang

Membre depuis le 01/13/22

345 Réputation

1 tutoriel rédigé

Badges: 7

+ 4 badges supplémentaires

Équipe

York University, Team S-29, Woodhouse Winter 2022 Membre de l'équipe York University, Team S-29, Woodhouse Winter 2022

YORK-WOODHOUSE-W22SSG29

1 membre

2 tutoriels rédigés

4 commentaires

Excellent illustration!!!

KO SAMUEL TAK SHUN - Réponse

عمل فنى رائع وجميل وبدقة متناهية

khaliddabnoun - Réponse

عمل فنى جميل ورائع وبدقة متناهية

khaliddabnoun - Réponse

Excellent how to! However the part attached to purchase doesn’t look like the original control board. Help!

magdelena kormusis - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 32

Total : 1,294