Aller au contenu principal

Kodak EasyShare C713 Outer Case Replacement

Ce dont vous avez besoin

  1. Kodak EasyShare C713 Outer Case Replacement, Batteries: étape 1, image 1 de 1
    • Use your finger tip to slide battery cover door away from the center of the camera.

    • The battery door should spring open.

    • If this does not happen, gently open the door lifting from the outer bottom side of the camera.

  2. Kodak EasyShare C713 Outer Case Replacement: étape 2, image 1 de 1
    • Remove the old batteries.

  3. Kodak EasyShare C713 Outer Case Replacement, Outer Case: étape 3, image 1 de 3 Kodak EasyShare C713 Outer Case Replacement, Outer Case: étape 3, image 2 de 3 Kodak EasyShare C713 Outer Case Replacement, Outer Case: étape 3, image 3 de 3
    • Remove the seven screws from the outer case with a Phillips #00.

    • All screws are 4.45mm.

    • There are 2 screws on the port side.

    • There are 2 screws on starboard side.

    • There are 3 screws on the bottom.

  4. Kodak EasyShare C713 Outer Case Replacement: étape 4, image 1 de 3 Kodak EasyShare C713 Outer Case Replacement: étape 4, image 2 de 3 Kodak EasyShare C713 Outer Case Replacement: étape 4, image 3 de 3
    • Make sure the battery cap is "up".

    • Pull the outer case off with your hands.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Taggart Ashby

Membre depuis le 04/15/10

354 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 26-19, Regan Spring 2010 Membre de l'équipe Cal Poly, Team 26-19, Regan Spring 2010

CPSU-REGAN-S10S26G19

4 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 2,446