Introduction

Remove damaged case and replace with new casing.

Pièces

Aucune pièce nécessaire.

  1. Remove 7 screws. 1 (6.25 mm) screw located on the top right corner, next to the view screen. 4 (4.45mm) screws on the bottom of the camera.
    • Remove 7 screws.

    • 1 (6.25 mm) screw located on the top right corner, next to the view screen.

    • 4 (4.45mm) screws on the bottom of the camera.

    • 2 (2.95mm) screws on the left side of the camera.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard. There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard. There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard.
    • There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard.

  4. Remove the rear camera casing. Remove the front casing.
    • Remove the rear camera casing.

    • Remove the front casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Michael

Membre depuis le 24/06/2010

63 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 2-8, Johann Summer 2010 Membre de l'équipe Cal Poly, Team 2-8, Johann Summer 2010

CPSU-JOHANN-R10S2G8

5 membres

8 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,641