1. Begin by sliding the switch towards the open symbol. Release your finger from the switch and the battery case will pop open. Begin by sliding the switch towards the open symbol. Release your finger from the switch and the battery case will pop open.
    • Begin by sliding the switch towards the open symbol. Release your finger from the switch and the battery case will pop open.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Next, press down on the red lever which holds the battery in place.
    • Next, press down on the red lever which holds the battery in place.

  4. Once the battery has popped out of the compartment, simply pull it out of the camera. Once the battery has popped out of the compartment, simply pull it out of the camera.
    • Once the battery has popped out of the compartment, simply pull it out of the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jack

Membre depuis le 10/10/2010

172 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 5-16, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 5-16, Maness Fall 2010

CPSU-MANESS-F10S5G16

4 membres

6 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 4

Total : 1,685