Introduction
This guide will show you Step-By-Step on how to fix a paper jam on your Kodak EasyShare Printer Dock (Series 3)
Ce dont vous avez besoin
-
-
Identify that your printer is jammed. This is usually indicated by the paper light blinking quickly.
-
-
-
Gently pull the paper tray out of the printing dock to remove it.
-
When the paper tray is empty, the paper light should glow a steady amber.
-
-
-
-
Disconnect the power adapter from the printer for 10 seconds, and then reconnect the cord.
-
Wait for the printer to initialize in order for the jammed paper to exit from the back side.
-
Notice: Carefully remove the paper if it does not automatically eject.
-
-
-
With the paper tray in hand, open the front lid in order to gain access to the paper supply.
-
Take hold of the paper bundle, and carefully “fan” it to keep the sheets from sticking together.
-
-
-
Reload the paper tray by sliding the paper bundle back into the intended slot, and then close the lid.
-
Next, slide the paper tray in the printer tray slot until the tray locks into place.
-
Press the power or print button to clear the paper error and resume printing.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Équipe
University of Maine, Team 1-6, Diaz Fall 2016 Membre de l'équipe University of Maine, Team 1-6, Diaz Fall 2016
UMAINE-DIAZ-F16S1G6
2 membres
1 tutoriel rédigé
