Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift up the lever from the center of the film roller.
-
Turn it clockwise to roll up the film until you feel the roller release, indicating all the film has been rolled up.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide the button up to the top where it says "open."
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull up on the lever to pop the roller up which will release the film.
-
Remove the old roll of film and slide in the new roll.
-
Push the roller back down to secure the film.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
To prepare the film for use, slightly pull the tail of the film out of the roll.
-
Drag the tail end of the film past the rotating column on the right side.
-
Attach the hooks at the base of the column to the holes located at the bottom of the film.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
After the film is secured, close the camera door.
-
Make sure the lever is put back in place on the film roller.
-
Use the scroll wheel to advance the film until it is ready to take pictures.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.