Aller au contenu principal

Introduction

If your lens is dirty or damaged, use this guide to replace the lens assembly.

  1. Place the camera on its back with the lens facing up. Firmly grip the lens assembly with one hand, and hold the camera with the other. Turn the lens assembly counterclockwise until it is free.
    • Place the camera on its back with the lens facing up.

    • Firmly grip the lens assembly with one hand, and hold the camera with the other. Turn the lens assembly counterclockwise until it is free.

    • If the lens assembly has never been removed, it may initially require some force for it to turn.

  2. Remove the old lens and replace it with the new lens.
    • Remove the old lens and replace it with the new lens.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Brian Skinner

Membre depuis le 10/09/2016

101 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team 6-3, Remmell Fall 2016 Membre de l'équipe USF Tampa, Team 6-3, Remmell Fall 2016

USFT-REMMELL-F16S6G3

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 10

Total : 569