Réparez vos affaires Communauté Boutique

Kodak Signet 35 Shutter Spring Replacement

Introduction

If the shutter on your Kodak Signet 35 isn't working properly, then the shutter spring may need to be cleaned or replaced. This guide will show you how. Please make sure you have all the necessary tools, as well as a clean and stable surface on which to work, before you start these steps.

Ce dont vous avez besoin

  1. Kodak Signet 35 Shutter Spring Replacement, Shutter Spring: étape 1, image 1 de 3 Kodak Signet 35 Shutter Spring Replacement, Shutter Spring: étape 1, image 2 de 3 Kodak Signet 35 Shutter Spring Replacement, Shutter Spring: étape 1, image 3 de 3

    • While the camera is lying on its back, unscrew the front lens assembly and remove the lens and the faceplate. Then lift off the speed setting.

    Modifier

  2. Kodak Signet 35 Shutter Spring Replacement: étape 2, image 1 de 2 Kodak Signet 35 Shutter Spring Replacement: étape 2, image 2 de 2

    • Remove the lever from the stopper by pushing it back and then upwards.

    Modifier

  4. Kodak Signet 35 Shutter Spring Replacement: étape 3, image 1 de 2 Kodak Signet 35 Shutter Spring Replacement: étape 3, image 2 de 2

    • Remove the stopper by lifting it upwards with the tweezers.

    Modifier

  5. Kodak Signet 35 Shutter Spring Replacement: étape 4, image 1 de 3 Kodak Signet 35 Shutter Spring Replacement: étape 4, image 2 de 3 Kodak Signet 35 Shutter Spring Replacement: étape 4, image 3 de 3

    • Using tweezers, unhitch the spring from the base and remove it by lifting upwards.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Mellyssa Greene

Membre depuis le 09/07/16

134 Réputation

1 tutoriel rédigé

Badges: 6

+ 3 badges supplémentaires

Équipe

USF Tampa, Team 6-3, Remmell Fall 2016 Membre de l'équipe USF Tampa, Team 6-3, Remmell Fall 2016

USFT-REMMELL-F16S6G3

4 membres

9 tutoriels rédigés

2 commentaires

What kind of spring can be used to replace it or how would one revitalize the old spring?

Ben Le - Réponse

What does “front lens assembly” look like? what parts do I have to unscrew?

Shawn Reynolds - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 13

30 derniers jours : 29

Total : 2,202