Aller au contenu principal

Introduction

The SD Memory Card must be inserted for the camera to function. If a card has not been inserted, a "no-card" warning is displayed on the LCD monitor when the camera is turned on.

  1. Open the memory card chamber on the bottom panel of the camera.
    • Open the memory card chamber on the bottom panel of the camera.

  2. Push to eject the old memory card out of place.
    • Push to eject the old memory card out of place.

  3. Insert the new memory card in. Make sure that it is inserted in the appropriate direction.
    • Insert the new memory card in. Make sure that it is inserted in the appropriate direction.

  4. Close the memory chamber and start the camera again.
    • Close the memory chamber and start the camera again.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Hieu Ngo

Membre depuis le 22/03/2017

431 Réputation

4 tutoriels rédigés

Équipe

UMass Dartmouth, Team S7-G4, Julie Spring 2017 Membre de l'équipe UMass Dartmouth, Team S7-G4, Julie Spring 2017

UMASSD-JULIE-S17S7G4

4 membres

8 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 6

Total : 392