Koosh Vortex Tornado Barrel Shield Spring Replacement

Introduction

This guide will show you how to replace the barrel shield spring on the Koosh Vortex Tornado.

Pull the halves of the toy gun apart to show the inside. Set the left half aside (all of the inside components are on the right half).

Using a spudger, unhook the barrel shield's spring from the right half of the toy gun. One side should still be connected to the shield barrel shield.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Membre depuis le 02/16/16

155 Réputation

1 tutoriel rédigé

IUPUI-HARLEY-S16S2G4

4 membres

3 tutoriels rédigés