Réparez vos affaires Communauté Boutique

Kyocera Hydro Life Charging Port Replacement

Introduction

This is a replacement guide for the charging port of the Kyocera Hydro Life. This guide requires specialized soldering knowledge and tools. Please ensure that you have these tools before attempting this guide.

Ce dont vous avez besoin

  1. Kyocera Hydro Life Charging Port Replacement, Charging Port: étape 1, image 1 de 2 Kyocera Hydro Life Charging Port Replacement, Charging Port: étape 1, image 2 de 2

    • Remove the back of the phone.

    Modifier

  2. Kyocera Hydro Life Charging Port Replacement: étape 2, image 1 de 3 Kyocera Hydro Life Charging Port Replacement: étape 2, image 2 de 3 Kyocera Hydro Life Charging Port Replacement: étape 2, image 3 de 3

    • Remove the battery by pulling up on the end and towards yourself.

    Modifier

  3. Kyocera Hydro Life Charging Port Replacement: étape 3, image 1 de 1

    • Use a PH0 screwdriver to remove the 6 screws which are holding the panel in the phone.

    Modifier

  4. Kyocera Hydro Life Charging Port Replacement: étape 4, image 1 de 3 Kyocera Hydro Life Charging Port Replacement: étape 4, image 2 de 3 Kyocera Hydro Life Charging Port Replacement: étape 4, image 3 de 3

    • Remove the frame from around the back of the phone.

    • Then remove the back panel of the phone.

    • Remove the white sticker from in the middle of the phone.

    Modifier

  6. Kyocera Hydro Life Charging Port Replacement: étape 5, image 1 de 3 Kyocera Hydro Life Charging Port Replacement: étape 5, image 2 de 3 Kyocera Hydro Life Charging Port Replacement: étape 5, image 3 de 3

    • Desolder the 7 pins.

    • If you have never soldered before, follow this guide.

    • This type of soldering requires very specialized and expensive equipment. Please be careful if you decide to continue following this guide.

    Modifier

  7. Kyocera Hydro Life Charging Port Replacement: étape 6, image 1 de 2 Kyocera Hydro Life Charging Port Replacement: étape 6, image 2 de 2

    • Desolder the positive and negative terminals.

    Modifier

  8. Kyocera Hydro Life Charging Port Replacement: étape 7, image 1 de 1

    • Peel back the copper plated sticker.

    • If the copper plated sticker is broken, it must be replaced. If it is not broken during disassembly, it can be reused.

    Modifier

  9. Kyocera Hydro Life Charging Port Replacement: étape 8, image 1 de 1

    • Remove the motherboard without breaking it by placing it to the side. It will still be attached to the phone.

    Modifier

  10. Kyocera Hydro Life Charging Port Replacement: étape 9, image 1 de 1

    • Using force, remove the charging port from the charging slot.

    Modifier

  11. Kyocera Hydro Life Charging Port Replacement: étape 10, image 1 de 1

    • Replace the charging port and ribbon.

    • If the copper-plated sticker is damaged, it will need to be replaced as well.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Rebecca Lamb

Membre depuis le 09/21/18

327 Réputation

2 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

University of North Texas, Team S2-G6, Riccardelli Fall 2018 Membre de l'équipe University of North Texas, Team S2-G6, Riccardelli Fall 2018

UNT-RICCARDELLI-F18S2G6

4 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 983