Réparez vos affaires Communauté Boutique

Kyocera Hydro Vibe Internal Speaker Replacement

Introduction

In this guide you will learn how to replace the speaker on the Kyocera Hydro Vibe. You will want to replace the speaker when the phone no longer produces sound. To replace the speaker you will first want to order a new speaker. You will then need a spudger and Phillips #000 screwdriver. The repair will take approximately an hour to complete. There are no foreseen hazards. However, you will want to be careful when taking apart the phone as to not damage it.

Ce dont vous avez besoin

  1. Kyocera Hydro Vibe Internal Speaker Replacement, Internal Speaker: étape 1, image 1 de 3 Kyocera Hydro Vibe Internal Speaker Replacement, Internal Speaker: étape 1, image 2 de 3 Kyocera Hydro Vibe Internal Speaker Replacement, Internal Speaker: étape 1, image 3 de 3

    • Remove the back plate of the device by popping it off with your fingernail or a spudger.

    Traduire

  2. Kyocera Hydro Vibe Internal Speaker Replacement: étape 2, image 1 de 2 Kyocera Hydro Vibe Internal Speaker Replacement: étape 2, image 2 de 2

    • Remove six Phillips screws (screw length of 5.35 mm and screw head diameter of 2.95mm) on the back of the device using a Phillips #000 screwdriver.

    Traduire

  4. Kyocera Hydro Vibe Internal Speaker Replacement: étape 3, image 1 de 3 Kyocera Hydro Vibe Internal Speaker Replacement: étape 3, image 2 de 3 Kyocera Hydro Vibe Internal Speaker Replacement: étape 3, image 3 de 3

    • Remove the trim around the outside of the device by peeling it off with your hands.

    Traduire

  5. Kyocera Hydro Vibe Internal Speaker Replacement: étape 4, image 1 de 3 Kyocera Hydro Vibe Internal Speaker Replacement: étape 4, image 2 de 3 Kyocera Hydro Vibe Internal Speaker Replacement: étape 4, image 3 de 3

    • Remove battery using the spudger or your fingernails to pry the battery up out of the case.

    Traduire

  6. Kyocera Hydro Vibe Internal Speaker Replacement: étape 5, image 1 de 2 Kyocera Hydro Vibe Internal Speaker Replacement: étape 5, image 2 de 2

    • Now remove the rear frame, exposing the speaker. To remove the frame you can use the Spudger tool from the iFixit Tool kit or your hands.

    Traduire

  7. Kyocera Hydro Vibe Internal Speaker Replacement: étape 6, image 1 de 3 Kyocera Hydro Vibe Internal Speaker Replacement: étape 6, image 2 de 3 Kyocera Hydro Vibe Internal Speaker Replacement: étape 6, image 3 de 3

    • Remove the speaker from its location on the back frame using a spudger.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Ben Lange

Membre depuis le 11/01/18

139 Réputation

1 tutoriel rédigé

Badges: 4

+ 1 badge de plus

Équipe

IUPUI, Team S3-G6, Harley Fall 2018 Membre de l'équipe IUPUI, Team S3-G6, Harley Fall 2018

IUPUI-HARLEY-F18S3G6

3 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 194