Aller au contenu principal

Introduction

Before beginning the project necessary tools needed will be a #00 screwdriver and flat prying device. You need to be prepared to collect the tiny screws that will be removed.

Pièces

Aucune pièce spécifiée.

  1. Open phone
    • Open phone

  2. Remove the four tiny front screen screws with a screw driver Remove the four tiny front screen screws with a screw driver
    • Remove the four tiny front screen screws with a screw driver

  3. Use prying tool to open the side of the screen and work you way around the screen. Use prying tool to open the side of the screen and work you way around the screen.
    • Use prying tool to open the side of the screen and work you way around the screen.

  4. Carefully remove screen after prying it lose, exposing the bottom screen and parts Carefully remove screen after prying it lose, exposing the bottom screen and parts
    • Carefully remove screen after prying it lose, exposing the bottom screen and parts

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Kimberlyn

Membre depuis le 14/10/2011

31 Réputation

1 tutoriel rédigé

Équipe

James Madison, Team 1-49, Allen Fall 2011 Membre de l'équipe James Madison, Team 1-49, Allen Fall 2011

JMU-ALLEN-F11S1G49

3 membres

8 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 922