Aller au contenu principal

Kyocera QCP-2035 Display Replacement

Ce dont vous avez besoin

  1. Kyocera QCP-2035 Display Replacement, Remove Back Cover: étape 1, image 1 de 3 Kyocera QCP-2035 Display Replacement, Remove Back Cover: étape 1, image 2 de 3 Kyocera QCP-2035 Display Replacement, Remove Back Cover: étape 1, image 3 de 3
    • When looking at the back of the phone, you will see a horizontal line and three raised segments of plastic in the form of a triangle.

    • Place thumb on top of the triangle and press into the phone while sliding your thumb towards the bottom of the phone.

    • In 5 mm it will stop sliding.

  2. Kyocera QCP-2035 Display Replacement: étape 2, image 1 de 3 Kyocera QCP-2035 Display Replacement: étape 2, image 2 de 3 Kyocera QCP-2035 Display Replacement: étape 2, image 3 de 3
    • Grab the bottom of the back cover with your other hand and pull the cover the rest of the way off.

    • Turn the phone over slowly. The battery will fall out on its own.

  3. Kyocera QCP-2035 Display Replacement: étape 3, image 1 de 3 Kyocera QCP-2035 Display Replacement: étape 3, image 2 de 3 Kyocera QCP-2035 Display Replacement: étape 3, image 3 de 3
    • Rotate the phone so the bottom is facing you. There is a small indent on the plastic face.

    • Using the tip of your fingernail or a spudger, pry the cover away from the rest of the phone.

    • Once the cover starts to part, keep separating until the top notches detach.

  4. Kyocera QCP-2035 Display Replacement: étape 4, image 1 de 3 Kyocera QCP-2035 Display Replacement: étape 4, image 2 de 3 Kyocera QCP-2035 Display Replacement: étape 4, image 3 de 3
    • With the cover plate separated, you will see (6) T6x11mm torx screws recessed in the white plastic.

    • Remove screws.

    • The white plastic face plate lifts right off, exposing the main board.

  5. Kyocera QCP-2035 Display Replacement, Display: étape 5, image 1 de 3 Kyocera QCP-2035 Display Replacement, Display: étape 5, image 2 de 3 Kyocera QCP-2035 Display Replacement, Display: étape 5, image 3 de 3
    • Lift the display straight up, by either grabbing it on it's sides, or sliding a pair of tweezers between the screen and the main board.

    • There are four straight plastic pins on the underside corners of the screen that hold it in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Scott Whitney

Membre depuis le 01/21/15

301 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team 5-3, Brown Winter 2015 Membre de l'équipe USF Tampa, Team 5-3, Brown Winter 2015

USFT-BROWN-W15S5G3

4 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 175