Aller au contenu principal

LG Cosmos Silicon Keypad Replacement

Ce dont vous avez besoin

  1. LG Cosmos Silicon Keypad Replacement, Battery: étape 1, image 1 de 1
    • Apply an upward force to slide the back cover off.

  2. LG Cosmos Silicon Keypad Replacement: étape 2, image 1 de 1
    • Use your finger to push down on the top of the battery and pull it out.

  3. LG Cosmos Silicon Keypad Replacement, Rear Case: étape 3, image 1 de 1
    • Remove the five 3.0mm Phillips #000 screws along the edge of the rear case.

  4. LG Cosmos Silicon Keypad Replacement: étape 4, image 1 de 1
    • Use a plastic opening tool to pry the rear case loose.

  5. LG Cosmos Silicon Keypad Replacement: étape 5, image 1 de 1
    • Once the rear case is loose, lift it from the rest of the phone.

  6. LG Cosmos Silicon Keypad Replacement, Motherboard: étape 6, image 1 de 1
    • Remove the two 2.9 mm Phillips #000 screws that are slightly off-centered to the right.

  7. LG Cosmos Silicon Keypad Replacement: étape 7, image 1 de 1
    • Use the plastic opening tool to pry the motherboard loose.

  8. LG Cosmos Silicon Keypad Replacement: étape 8, image 1 de 1
    • Hold the motherboard from the top and bottom and slowly lift the motherboard until you feel a pull.

    • The flex cable is attached at the bottom of the motherboard and can be damaged if too much lifting force is applied.

  9. LG Cosmos Silicon Keypad Replacement: étape 9, image 1 de 1
    • Once the motherboard is lifted , rotate the motherboard up 90 degrees to the right.

  10. LG Cosmos Silicon Keypad Replacement: étape 10, image 1 de 1
    • Use your finger to pull the flex cable out from its connector.

  11. LG Cosmos Silicon Keypad Replacement: étape 11, image 1 de 1
    • Pull the motherboard away from the rest of the phone.

  12. LG Cosmos Silicon Keypad Replacement, Silicon Keypad: étape 12, image 1 de 1
    • Lift the silicon keypad away from the rest of the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Johnny Phane

Membre depuis le 04/15/13

70 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 13-63, Johann Spring 2013 Membre de l'équipe Cal Poly, Team 13-63, Johann Spring 2013

CPSU-JOHANN-S13S13G63

3 membres

10 tutoriels rédigés

Un commentaire

Steps 10 and 11 are not necessary for replacing just the silicone keypad. As long as you are careful not to pull on the motherboard, once you have the motherboard rotated up, you are able to replace the silicone keypad directly from that point.

Randy - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 849