Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

Before being able to do anything inside your LG G Pad, you will need to remove the back panel. Follow this guide to do so.

Pièces

Aucune pièce spécifiée.

  1. With the screen faced up, insert the metal spudger into the crevice so that it is sticking out between the side panel and the screen.
    • With the screen faced up, insert the metal spudger into the crevice so that it is sticking out between the side panel and the screen.

    • Be gentle when popping the panel off.

  2. OUVRIR TOUS LES ONGLETS

    Kits de mise à jour de RAM pour Mac

    Voir les kits

    Assez de RAM
    pour ouvrir tous les onglets

    Voir les kits
  3. Take the spudger and slide it around the perimeter of the device. Pull gently on the edges to get the panel to pop up. If the panel does not budge, be aware that there is adhesive on the back of the battery holding the back shut. Make sure to just move around the perimeter of the back panel until the panel is able to lift forward.
    • Take the spudger and slide it around the perimeter of the device.

    • Pull gently on the edges to get the panel to pop up.

    • If the panel does not budge, be aware that there is adhesive on the back of the battery holding the back shut. Make sure to just move around the perimeter of the back panel until the panel is able to lift forward.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Charlie Castorena

Membre depuis le 18/09/2018

417 Réputation

3 tutoriels rédigés

Équipe

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 8

Total : 214