Réparez vos affaires Communauté Boutique

LG G Watch Motherboard Replacement

Introduction

This guide will show you how to replace the motherboard in your LG G Watch.

Ce dont vous avez besoin

  1. LG G Watch Motherboard Replacement, Wristband: étape 1, image 1 de 1

    • Spring bars attach the two halves of the wristband to the watch body. The spring bar has a shoulder on either end.

    • Be prepared to apply some pressure with your fingers to perform the following action.

    • First, slide the wristband down on the spring bar to expose the shoulder of the spring bar.

    • Grasp the exposed shoulder with the tweezers to perform the next step.

    Modifier

    Is there a reason you are removing the straps before the back of the watch? They don't block the back from coming off or really get in the way much.

    Andy Wickham - Réponse

    its in the way, obviously it need to take them off, lol.

    silentg4real -

    Where can I get this battery?

    Josh Wheat - Réponse

    where can i buy a new replacement rear case? please let me know!

    silentg4real - Réponse

    I'd like to know as well and don't care if it's a knock off either

    Joseph Wellman -

  2. LG G Watch Motherboard Replacement: étape 2, image 1 de 2 LG G Watch Motherboard Replacement: étape 2, image 2 de 2

    • This is a challenging step. Do it carefully to prevent the spring bar from flying out of the wristband.

    • Use the tweezer to depress the spring bar so that it collapses by a few millimeters and pops out of the hole that was holding it in place.

    • Now carefully pull the other end of the spring bar to detach the wristband from the watch face.

    • Repeat steps 1 and 2 for the other wristband.

    Modifier

  3. LG G Watch Motherboard Replacement, Rear Case: étape 3, image 1 de 1

    • Use the T5 Torx screwdriver to unscrew the four silver 2mm x 3mm T5 screws that hold the back cover in place.

    Modifier

  5. LG G Watch Motherboard Replacement: étape 4, image 1 de 2 LG G Watch Motherboard Replacement: étape 4, image 2 de 2

    • Slide the opening pick between the rear case and the rest of the device to separate the two halves.

    • Gently pull the two halves apart.

    Modifier

  6. LG G Watch Motherboard Replacement, Gasket: étape 5, image 1 de 1

    • Use a pair of tweezers to remove the gasket that lies embedded in a groove that runs around the perimeter of the front half.

    Modifier

  7. LG G Watch Motherboard Replacement, Motherboard: étape 6, image 1 de 2 LG G Watch Motherboard Replacement, Motherboard: étape 6, image 2 de 2

    • Use the spudger to gently lift up and disconnect the display connector.

    • Now use the spudger to disconnect the digitizer connector.

    Modifier

  8. LG G Watch Motherboard Replacement: étape 7, image 1 de 2 LG G Watch Motherboard Replacement: étape 7, image 2 de 2

    • Use a Phillips #000 screwdriver to remove the two black PHO 2.5mm x 3mm screws.

    • Use the spudger to gently remove the motherboard.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 7 autres contributeurs

Meles Anneaud

Membre depuis le 09/23/14

140 Réputation

1 tutoriel rédigé

Badges: 6

+ 3 badges supplémentaires

Équipe

USF Tampa, Team 2-5, Blackwell Fall 2014 Membre de l'équipe USF Tampa, Team 2-5, Blackwell Fall 2014

USFT-BLACKWELL-F14S2G5

5 membres

9 tutoriels rédigés

Un commentaire

is it possible to replace the battery which is in the board?

Vassago U7 (VassagoU7) - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 1,031