Réparez vos affaires Communauté Boutique

LG G Watch Spring Bar Pin Replacement

Introduction

Use this guide to replace the spring bar pins on your LG G Watch.

Ce dont vous avez besoin

  1. LG G Watch Spring Bar Pin Replacement, Wristband: étape 1, image 1 de 1

    • Spring bars attach the two halves of the wristband to the watch body. The spring bar has a shoulder on either end.

    • Be prepared to apply some pressure with your fingers to perform the following action.

    • First, slide the wristband down on the spring bar to expose the shoulder of the spring bar.

    • Grasp the exposed shoulder with the tweezers to perform the next step.

    Modifier

  3. LG G Watch Spring Bar Pin Replacement: étape 2, image 1 de 2 LG G Watch Spring Bar Pin Replacement: étape 2, image 2 de 2

    • This is a challenging step. Do it carefully to prevent the spring bar from flying out of the wristband.

    • Use the tweezer to depress the spring bar so that it collapses by a few millimeters and pops out of the hole that was holding it in place.

    • Now carefully pull the other end of the spring bar to detach the wristband from the watch face.

    • Repeat steps 1 and 2 for the other wristband.

    Modifier

  4. LG G Watch Spring Bar Pin Replacement, Spring Bar Pin: étape 3, image 1 de 1

    • Slide the spring bar pin out of the wristband.

    • Repeat this step for the other wristband.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

Geoff Wacker

Membre depuis le 09/30/13

89 901 Réputation

89 tutoriels rédigés

Badges: 44

+ 41 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 3

Total : 1,014