Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
While holding the battery release button, pull the bottom end of the phone out of the body.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert the sim card eject tool (0.8mm sim card eject head) into the small hole on the sim card tray.
-
Press inward with some force to eject the tray.
-
Pull the sim card tray out of the phone.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two 5.5mm Phillips #00 screws from the base of the phone.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert the plastic opening tool into the seam between the glass screen and the metal body.
-
Pry the glass from the body only a slight amount.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert the Spudger into the now open space between the body and screen.
-
Push inward to separate the screen even more.
-
Slowly slide the nylon spudger up the edge the phone till the screen pops out of the body.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Peel the screen away from the body. The two parts should be completely separated.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Locate the auxiliary port on the top right of the phone
-
Using a finger, carefully take the port out
-
Annulation : je n'ai pas terminé ce tutoriel.
8 autres ont terminé cette réparation.
2 commentaires
I saw a video where someone used a guitar pick as the plastic opening tool, seems safer to me. And that person also had a great idea to shove a pencil in the battery bay to apply a separating force, so that as you work the seam with a guitar pick, the the two halves will naturally want to separate.
Hi, I have two LG G5 phone. Let's call them
A & B.
So , B overheats and the battery last less than an hour. So I took the battery from A and I put it in B and I put the B battery in the A. Results: B still overheats and not the A ??? I also left the connector blocks on the batteries when I did the switching. So what could be the cause of this?