Aller au contenu principal

LG Incite Camera Replacement

Ce dont vous avez besoin

  1. LG Incite Camera Replacement, Battery: étape 1, image 1 de 1
    • Hold the phone camera-side up and locate the rear cover.

  2. LG Incite Camera Replacement: étape 2, image 1 de 1
    • Place a thumb below the camera, apply a little pressure, and slide the cover toward the bottom of the phone.

  3. LG Incite Camera Replacement: étape 3, image 1 de 1
    • Place the plastic opening tool in the small slot below and to the left of the battery.

    • Pry the battery upward to remove it.

  4. LG Incite Camera Replacement, Back Panel: étape 4, image 1 de 1
    • Using the #00 Philips screw driver, unscrew the four 4.5mm screws located around the battery compartment.

  5. LG Incite Camera Replacement: étape 5, image 1 de 1
    • Wedge the plastic opening tool between the screen and the body of the device, using care to avoid damaging internal components.

    • Gently move the tool around the perimeter of the screen to separate it from the body.

    • You should not completely separate the screen from the device in this step.

  6. LG Incite Camera Replacement: étape 6, image 1 de 1
    • Flip the device over so the battery compartment faces up.

    • Press the scroll wheel, located in the upper-left corner, into the device to avoid damage.

    • Gently insert the plastic opening tool into the seam between the frame and front cover to separate the back panel from the device.

    • The volume, lock, and camera buttons are loose, so be careful not to misplace them.

  7. LG Incite Camera Replacement, Camera: étape 7, image 1 de 2 LG Incite Camera Replacement, Camera: étape 7, image 2 de 2
    • Locate the camera near the upper-left corner and use the metal tweezers to carefully detach the black tab.

  8. LG Incite Camera Replacement: étape 8, image 1 de 3 LG Incite Camera Replacement: étape 8, image 2 de 3 LG Incite Camera Replacement: étape 8, image 3 de 3
    • Carefully slide the metal tweezers underneath the camera in order to lift it out.

    • Do not puncture the gold lining surrounding the camera.

    • The camera is glued in place, so there may be a slight resistance.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Kimberly Kha

Membre depuis le 04/16/13

163 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 2-18, Maness Spring 2013 Membre de l'équipe Cal Poly, Team 2-18, Maness Spring 2013

CPSU-MANESS-S13S2G18

4 membres

11 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 552