Aller au contenu principal

LG L1200 Logic Board Replacement

Ce dont vous avez besoin

  1. LG L1200 Logic Board Replacement, Logic Board: étape 1, image 1 de 1
    • Make sure you remove the battery by lifting the tab on the back of the phone before opening the case.

    • Poke out rubber covers using a spudger or pointy object, such as a thumb tack.

  2. LG L1200 Logic Board Replacement: étape 2, image 1 de 1
    • Use a T6 torx screwdriver to unscrew the 6 screws that hold the back casing on.

  3. LG L1200 Logic Board Replacement: étape 3, image 1 de 1
    • Use IPod opening tool to separate back housing.

    • There are two tabs located on either side of the phone.

  4. LG L1200 Logic Board Replacement: étape 4, image 1 de 1
    • Separate the back housing from the phone.

    • Be careful not to rip out the wire (highlighted in yellow) when separating the back housing.

  5. LG L1200 Logic Board Replacement: étape 5, image 1 de 1
    • Use a spudger to disconnect antenna wire.

  6. LG L1200 Logic Board Replacement: étape 6, image 1 de 1
    • Use the IPod opening tool to pop out the logic board.

  7. LG L1200 Logic Board Replacement: étape 7, image 1 de 1
    • Use the IPod opening tool to disconnect the main ribbon.

  8. LG L1200 Logic Board Replacement: étape 8, image 1 de 1
    • Once the ribbon is detached, remove the logic board and replace if necessary.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joshua Herrmann

Membre depuis le 04/16/10

8 Réputation

8 tutoriels rédigés

Équipe

Cal Poly, Team 6-14, Maness Spring 2010 Membre de l'équipe Cal Poly, Team 6-14, Maness Spring 2010

CPSU-MANESS-S10S6G14

4 membres

16 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,210