Réparez vos affaires Communauté Boutique

LG Neon GT 365 Case Replacement

Introduction

This guide explains how to replace the Case of a LG Neon GT 365 phone

Ce dont vous avez besoin

  1. LG Neon GT 365 Case Replacement, Case: étape 1, image 1 de 1

    • Remove the back cover of the phone by pushing the rectangular button located on the back top-side of the phone.

    Modifier

  2. LG Neon GT 365 Case Replacement: étape 2, image 1 de 1

    • Use the appropriate screw driver head and remove the six black screws as shown in the picture. A screw may be covered by the slide spring. Move the slide spring to the other side to access that screw.

    Modifier

  3. LG Neon GT 365 Case Replacement: étape 3, image 1 de 2 LG Neon GT 365 Case Replacement: étape 3, image 2 de 2

    • Use the plastic opening tool to go around the seem and slowly pull off slide spring assembly.

    • Make sure the ribbon connector does not get caught on other parts of the phone.

    Modifier

  4. LG Neon GT 365 Case Replacement: étape 4, image 1 de 1

    • Remove the connector ribbon located near the bottom of the phone by pulling gently on the ribbon.

    Modifier

  6. LG Neon GT 365 Case Replacement: étape 5, image 1 de 2 LG Neon GT 365 Case Replacement: étape 5, image 2 de 2

    • Carefully, peel off the two green pieces of tape then the gold tape.

    Modifier

  7. LG Neon GT 365 Case Replacement: étape 6, image 1 de 1

    • Disconnect the copper colored ribbon. It is fine to leave the copper ribbon ttached to the top of the phone.

    Modifier

  8. LG Neon GT 365 Case Replacement: étape 7, image 1 de 1

    • Use the plastic opening tool and go around the silver screen and begin to lift it up.

    • Once the silver screen has been lifted up slightly, slide the bottom half of the green circuit board located below the screen off of the phone. Then continue popping the screen out.

    Modifier

  9. LG Neon GT 365 Case Replacement: étape 8, image 1 de 1

    • Once the silver screen has been lifted up slightly, slide the bottom half of the green circuit board located below the screen off of the phone.

    Modifier

  10. LG Neon GT 365 Case Replacement: étape 9, image 1 de 2 LG Neon GT 365 Case Replacement: étape 9, image 2 de 2

    • Disconnect left side of this ribbon.

    • By disconnecting the left side of that ribbon, the phone's screen can be removed from the outer shell.

    Modifier

  11. LG Neon GT 365 Case Replacement: étape 10, image 1 de 1

    • Use the plastic opening tool to remove that speaker out of the groove.

    • Use the plastic opening tool to remove the copper colored plate that the speaker and ribbon is attached to out of the phone.

    Modifier

  12. LG Neon GT 365 Case Replacement: étape 11, image 1 de 1

    • Peel the rubber front keypad out of the case.

    Modifier

  13. LG Neon GT 365 Case Replacement: étape 12, image 1 de 1

    • At this point, all of removable phone components has been taken out. With the new case, follow the steps in reverse to reassemble.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 10 autres contributeurs

kristie

Membre depuis le 10/23/13

538 Réputation

5 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

UMass Dartmouth, Team 2-1, Gulbrandsen Fall 2013 Membre de l'équipe UMass Dartmouth, Team 2-1, Gulbrandsen Fall 2013

UMASSD-GULBRANDSEN-F13S2G1

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 294