Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

This guide provides instructions for replacing the microphone on the LG TP 1100 flip phone.

  1. Hold antenna between your fingers and unscrew in a counterclockwise direction.
    • Hold antenna between your fingers and unscrew in a counterclockwise direction.

  2. You will remove antenna by pulling it in an upward motion away from the socket.
    • You will remove antenna by pulling it in an upward motion away from the socket.

  3. Turn phone so that the back is facing you.
    • Turn phone so that the back is facing you.

  4. Use your thumb to pull the tab in an upward motion to release the battery.
    • Use your thumb to pull the tab in an upward motion to release the battery.

  5. Kits pour Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

    Kits pour Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits
  6. Hold phone securely in one hand and pull the battery away from the phone with your other hand.
    • Hold phone securely in one hand and pull the battery away from the phone with your other hand.

  7. Use your screwdriver to unscrew the four screws from the back plate.
    • Use your screwdriver to unscrew the four screws from the back plate.

  8. Turn phone to the side as indicated in the picture.
    • Turn phone to the side as indicated in the picture.

  9. Remove the back cover that you just unscrewed and set aside.
    • Remove the back cover that you just unscrewed and set aside.

  10. Open the remaining parts like a book but do not separate the two pieces.
    • Open the remaining parts like a book but do not separate the two pieces.

    • Do not tear the tape connecting the two pieces.

  11. Rotate the phone so that the circuit board is in the palm of your hand and the part connected with tape hangs behind. Use your opening tool to pry the circuit board from the front cover. Do not let the number pad to fall out.
    • Rotate the phone so that the circuit board is in the palm of your hand and the part connected with tape hangs behind.

    • Use your opening tool to pry the circuit board from the front cover. Do not let the number pad to fall out.

  12. To remove the microphone, insert your opening tool under microphone and push upward to pry microphone away from the front cover.
    • To remove the microphone, insert your opening tool under microphone and push upward to pry microphone away from the front cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Johnny Inlow

Membre depuis le 10/04/2010

19 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 27-91, Amido Spring 2010 Membre de l'équipe Cal Poly, Team 27-91, Amido Spring 2010

CPSU-AMIDO-S10S27G91

5 membres

11 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 1,222