Réparez vos affaires Communauté Boutique

LG VX4500 display interconnect cable

Introduction

Replacing the ribbon cable.

Ce dont vous avez besoin

  1. LG VX4500 display interconnect cable, Battery: étape 1, image 1 de 1

    • Turn the closed phone so that the back panel is facing you.

    • Press down and forward firmly on the gray tab in the middle of the phone.

    Modifier

  2. LG VX4500 display interconnect cable: étape 2, image 1 de 2 LG VX4500 display interconnect cable: étape 2, image 2 de 2

    • Now just lift up on the battery and remove it from the phone.

    Modifier

  3. LG VX4500 display interconnect cable, Rear Cover: étape 3, image 1 de 1

    • Remove the rubber grommet using a Spudger.

    Modifier

  4. LG VX4500 display interconnect cable: étape 4, image 1 de 1

    • Be sure not to lose the screws. They are small!

    • Remove the five screws using a Phillips #00 Screwdriver.

    Modifier

  5. LG VX4500 display interconnect cable: étape 5, image 1 de 3 LG VX4500 display interconnect cable: étape 5, image 2 de 3 LG VX4500 display interconnect cable: étape 5, image 3 de 3

    • When removing back cover, be careful not to break the speaker wires.

    • Using an Opening Tool, carefully pry off the back cover.

    • Using tweezers, gently pull the speaker wires out.

    Modifier

  6. LG VX4500 display interconnect cable: étape 6, image 1 de 1

    • Separate the two halves.

    Modifier

  7. LG VX4500 display interconnect cable, Keypad: étape 7, image 1 de 3 LG VX4500 display interconnect cable, Keypad: étape 7, image 2 de 3 LG VX4500 display interconnect cable, Keypad: étape 7, image 3 de 3

    • Carefully pry and lift up on the logic board using an iPod Opening Tool.

    Modifier

  8. LG VX4500 display interconnect cable: étape 8, image 1 de 1

    • Carefully flip the logic board up and out of the way.

    Modifier

  10. LG VX4500 display interconnect cable: étape 9, image 1 de 3 LG VX4500 display interconnect cable: étape 9, image 2 de 3 LG VX4500 display interconnect cable: étape 9, image 3 de 3

    • Use an iPod Opening Tool to lift up on the keypad and pull it out.

    Modifier

  11. LG VX4500 display interconnect cable, Motherboard: étape 10, image 1 de 1

    • DO NOT TOUCH SOLDERING IRON. IT IS EXTREMELY HOT.

    • Use a soldering iron to desolder the solder joint on the front of the motherboard.

    • If you need more information on soldering, refer to this guide.

    Modifier

  12. LG VX4500 display interconnect cable: étape 11, image 1 de 1

    • Desolder the joint on the back using a soldering iron.

    Modifier

  13. LG VX4500 display interconnect cable: étape 12, image 1 de 3 LG VX4500 display interconnect cable: étape 12, image 2 de 3 LG VX4500 display interconnect cable: étape 12, image 3 de 3

    • Carefully detach the ribbon cable and remove the motherboard.

    Modifier

  14. LG VX4500 display interconnect cable, Outer Display Cover: étape 13, image 1 de 1

    • Remove 4 rubber grommets using the Spudger.

    Modifier

  15. LG VX4500 display interconnect cable: étape 14, image 1 de 1

    • Remove 4 screws using the Phillips #00 Screwdriver.

    Modifier

  16. LG VX4500 display interconnect cable: étape 15, image 1 de 3 LG VX4500 display interconnect cable: étape 15, image 2 de 3 LG VX4500 display interconnect cable: étape 15, image 3 de 3

    • Carefully pry off outer cover using iPod Opening Tool.

    Modifier

  17. LG VX4500 display interconnect cable, Display: étape 16, image 1 de 2 LG VX4500 display interconnect cable, Display: étape 16, image 2 de 2

    • Remove speaker using the Spudger.

    Modifier

  18. LG VX4500 display interconnect cable: étape 17, image 1 de 2 LG VX4500 display interconnect cable: étape 17, image 2 de 2

    • Remove vibrator using the Spudger.

    Modifier

  19. LG VX4500 display interconnect cable: étape 18, image 1 de 2 LG VX4500 display interconnect cable: étape 18, image 2 de 2

    • Lift up LCD display using iPod Opening Tool.

    Modifier

  20. LG VX4500 display interconnect cable: étape 19, image 1 de 1

    • DO NOT TOUCH THE SOLDERING IRON. IT IS EXTREMELY HOT!

    • De-solder solder joint using Soldering Iron.

    Modifier

  21. LG VX4500 display interconnect cable: étape 20, image 1 de 2 LG VX4500 display interconnect cable: étape 20, image 2 de 2

    • Pry off ribbon cable using iPod Opening Tool.

    Modifier

  22. LG VX4500 display interconnect cable, Ribbon Cable: étape 21, image 1 de 3 LG VX4500 display interconnect cable, Ribbon Cable: étape 21, image 2 de 3 LG VX4500 display interconnect cable, Ribbon Cable: étape 21, image 3 de 3

    • Turn phone so that the back side is facing you.

    • Press blue button and remove top half using Spudger.

    Modifier

  23. LG VX4500 display interconnect cable: étape 22, image 1 de 2 LG VX4500 display interconnect cable: étape 22, image 2 de 2

    • Remove cable from bottom section.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

David Foster

Membre depuis le 04/11/10

1 Réputation

8 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

Cal Poly, Team 25-88, Amido Spring 2010 Membre de l'équipe Cal Poly, Team 25-88, Amido Spring 2010

CPSU-AMIDO-S10S25G88

4 membres

18 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 3,179