Aller au contenu principal

Introduction

A guide on how to replace the logic board in the LG VX5400.

Pièces

Aucune pièce spécifiée.

  1. Turn off the cell phone and turn it over on its back side
    • Turn off the cell phone and turn it over on its back side

  2. Hold the phone case in your palm and slide the back cover towards yourself using your thumb
    • Hold the phone case in your palm and slide the back cover towards yourself using your thumb

  3. Slide a tool or finger into the notch at the top of the battery  to carefully remove it. Slide a tool or finger into the notch at the top of the battery  to carefully remove it. Slide a tool or finger into the notch at the top of the battery  to carefully remove it.
    • Slide a tool or finger into the notch at the top of the battery to carefully remove it.

  4. Fix Kits pour Android

    Remplacer l'écran ou la batterie est à portée de kit !

    Acheter maintenant

    Fix Kits pour Android

    Remplacer l'écran ou la batterie est à portée de kit !

    Acheter maintenant
  5. Take the Philips screwdriver and unscrew the four visible screws on the backside of the phone indicated by the four red circles.
    • Take the Philips screwdriver and unscrew the four visible screws on the backside of the phone indicated by the four red circles.

  6. Then, take the pointed end of a spudger and pry out the rubber stopper to reveal the last screw at the top indicated with the blue circle.
    • Then, take the pointed end of a spudger and pry out the rubber stopper to reveal the last screw at the top indicated with the blue circle.

  7. While the phone is open and faced up, carefully insert a tool into the middle to seperate the bottom half of the phone. While the phone is open and faced up, carefully insert a tool into the middle to seperate the bottom half of the phone.
    • While the phone is open and faced up, carefully insert a tool into the middle to seperate the bottom half of the phone.

  8. Carefully slide out the keypad and remove the logic board. Then insert new the logic board. Carefully slide out the keypad and remove the logic board. Then insert new the logic board.
    • Carefully slide out the keypad and remove the logic board. Then insert new the logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Sourabh

Membre depuis le 15/04/2010

132 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 26-26, Regan Spring 2010 Membre de l'équipe Cal Poly, Team 26-26, Regan Spring 2010

CPSU-REGAN-S10S26G26

4 membres

10 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 2,328