Introduction
Phone won't charge, and the charger is functional? Replace your phone's charging adapter.
NOTE: Charging adapter is attached to the logic board, so replacement requires replacing the logic board.
Outils
Pièces
Aucune pièce spécifiée.
-
-
Lay the phone face down with the screen in palm of hand.
-
Slide the grey button towards the top of the phone.
-
-
-
Remove four screws beneath battery using screw driver.
-
Remove three rubber screw covers with tweezers.
-
Remove the three screws under the covers with the screwdriver.
-
-
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.