Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Turn the phone off. Remove the back cover by sliding the tab away from the phone using one finger.
    • Turn the phone off.

    • Remove the back cover by sliding the tab away from the phone using one finger.

  2. Lift one side of the battery using a plastic opening tool or your fingers.
    • Lift one side of the battery using a plastic opening tool or your fingers.

    • Carefully remove the battery and set it aside.

  3. When installing the battery, make sure to align the metal pins with those of the phone.
    • When installing the battery, make sure to align the metal pins with those of the phone.

  4. Turn your phone around and open the flip phone.
    • Turn your phone around and open the flip phone.

    • Locate the two grey rubber plugs on the LCD portion of the phone. These plugs cover up two screws.

    • Remove the two grey screw-covers at the bottom of the screen

  5. Fix Kits pour Android

    A new screen or battery is one kit away.

    Acheter maintenant

    Fix Kits pour Android

    A new screen or battery is one kit away.

    Acheter maintenant
  6. Remove the screen by using the tab to eject the screen. There is a gap between the case and the screen near the ear piece
    • Remove the screen by using the tab to eject the screen.

    • There is a gap between the case and the screen near the ear piece

    • Insert the plastic opening tool in the gap and pry the screen up.

    • The plastic screen cover is glued onto the phone, do not be alarmed if it may be difficult to pry it off.

  7. Unscrew the four corner 3.21mm screws to separate the the top cover of the phone
    • Unscrew the four corner 3.21mm screws to separate the the top cover of the phone

  8. Turn your phone around Remove the top cover of the phone by inserting the plastic opening tool into the groove.
    • Turn your phone around

    • Remove the top cover of the phone by inserting the plastic opening tool into the groove.

    • Carefully open the cover.

  9. Now we have the LCD outer case off. The LCD display can be seen on the left, the camera on the right.
    • Now we have the LCD outer case off. The LCD display can be seen on the left, the camera on the right.

    • Place the phone assembly down, it is not needed anymore.

  10. To remove the camera the ribbon connector should be removed.
    • To remove the camera the ribbon connector should be removed.

    • This ribbon connector is glued to the case, using the plastic opening tool pry the connector off.

  11. The camera should come loose after the connector is pried off.
    • The camera should come loose after the connector is pried off.

    • Take the new camera and apply a small square of double sided tape to the new ribbon connector.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew

Membre depuis le 20/01/2012

7 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 8-16, Maness Winter 2012 Membre de l'équipe Cal Poly, Team 8-16, Maness Winter 2012

CPSU-MANESS-W12S8G16

4 membres

14 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 583