Réparez vos affaires Communauté Boutique

LG env2 vx9100 Front Panel Replacement

Introduction

In this guide you will be removing the front panel from the rest of the phone.

Ce dont vous avez besoin

  1. LG env2 vx9100 Front Panel Replacement, Battery: étape 1, image 1 de 3 LG env2 vx9100 Front Panel Replacement, Battery: étape 1, image 2 de 3 LG env2 vx9100 Front Panel Replacement, Battery: étape 1, image 3 de 3

    • Before disassembling your phone, be sure it is powered off to avoid minor electric shock or possible fire.

    • Place the phone face down on the table.

    • Use your fingernail or an opening tool to pull down the tab below the battery.

    • Lift the battery out.

    Traduire

  2. LG env2 vx9100 Front Panel Replacement, Back Panel: étape 2, image 1 de 2 LG env2 vx9100 Front Panel Replacement, Back Panel: étape 2, image 2 de 2

    • Locate the five rubber covers on the back panel of the phone.

    • Use the metal probe to pop out each rubber cover to reveal the screws underneath.

    Traduire

  3. LG env2 vx9100 Front Panel Replacement: étape 3, image 1 de 2 LG env2 vx9100 Front Panel Replacement: étape 3, image 2 de 2

    • Locate the six 2.5mm screws on the back panel of the phone.

    • Use a #00 Phillips screwdriver to remove each 2.5mm screw.

    Traduire

  5. LG env2 vx9100 Front Panel Replacement: étape 4, image 1 de 2 LG env2 vx9100 Front Panel Replacement: étape 4, image 2 de 2

    • Locate the seam around the edge of the phone.

    • Insert the plastic opening tool into the seam and pry gently to release the tabs.

    • Work your way around the phone until all tabs are released.

    • Remove the back panel of the phone.

    Traduire

  6. LG env2 vx9100 Front Panel Replacement, Front Panel: étape 5, image 1 de 2 LG env2 vx9100 Front Panel Replacement, Front Panel: étape 5, image 2 de 2

    • Locate the rubber covers at the top two corners of the inside of the phone.

    • Use the metal probe to remove the rubber covers to reveal the 2.5mm screws.

    Traduire

  7. LG env2 vx9100 Front Panel Replacement: étape 6, image 1 de 2 LG env2 vx9100 Front Panel Replacement: étape 6, image 2 de 2

    • Locate the 2.5mm screws that were underneath the rubber covers.

    • Use a #00 Phillips screwdriver to remove both 2.5mm screws.

    Traduire

  8. LG env2 vx9100 Front Panel Replacement: étape 7, image 1 de 2 LG env2 vx9100 Front Panel Replacement: étape 7, image 2 de 2

    • Locate the two 2.5mm screws at the bottom two corners of the inside of the phone.

    • These screws will not be visible or accessible unless the 2 sides of the phone are at approximately 90 degrees relative to each other.

    • Use a #00 Phillips screwdriver to remove both 2.5mm screws.

    Traduire

  9. LG env2 vx9100 Front Panel Replacement: étape 8, image 1 de 2 LG env2 vx9100 Front Panel Replacement: étape 8, image 2 de 2

    • Locate the crease that travels all around the edge of the phone.

    • Wedge the plastic opening tool in the crease and move it along each edge of the phone.

    • Separate the front panel from the rest of the phone.

    • Be careful not to damage the orange ribbon that connects to the logic board through the hinge in the phone. If the ribbon is damaged, the phone will not function properly.

    • Open the phone to reveal the inside monitor.

    Traduire

  10. LG env2 vx9100 Front Panel Replacement: étape 9, image 1 de 3 LG env2 vx9100 Front Panel Replacement: étape 9, image 2 de 3 LG env2 vx9100 Front Panel Replacement: étape 9, image 3 de 3

    • Locate the two 2.5mm screws to the right of the screen (on the photograph shown they are at the bottom).

    • Use a #00 Phillips screwdriver to remove each 2.5mm screw.

    • Using your hands separate the front panel from the phone by carefully pulling it straight off.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 9 autres contributeurs

Reed Williston

Membre depuis le 09/26/12

34 Réputation

7 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 16-55, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 16-55, Forte Fall 2012

CPSU-FORTE-F12S16G55

5 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 4

Total : 1,533