Réparez vos affaires Communauté Boutique

LaCie Rugged USB-C Circuit Board Replacement

Ce dont vous avez besoin

  1. LaCie Rugged USB-C Circuit Board Replacement, Overview: étape 1, image 1 de 3 LaCie Rugged USB-C Circuit Board Replacement, Overview: étape 1, image 2 de 3 LaCie Rugged USB-C Circuit Board Replacement, Overview: étape 1, image 3 de 3

    • This guide contains steps for the LaCie Rugged USB-C. There is no guarantee that the steps will be the same for different models.

    Modifier

  2. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: étape 2, image 1 de 2 LaCie Rugged USB-C Circuit Board Replacement, Case Removal: étape 2, image 2 de 2

    • Remove the rubber case around the drive. You can just stretch it off.

    Modifier

  3. LaCie Rugged USB-C Circuit Board Replacement, Case Screws: étape 3, image 1 de 2 LaCie Rugged USB-C Circuit Board Replacement, Case Screws: étape 3, image 2 de 2

    • Remove these 4x Torx T8 screws

    Modifier

  5. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: étape 4, image 1 de 2 LaCie Rugged USB-C Circuit Board Replacement, Case Removal: étape 4, image 2 de 2

    • Push on one side of the drive, where the white plastic is. Which side does not matter.

    Modifier

  6. LaCie Rugged USB-C Circuit Board Replacement, Preparing for Drive Removal: étape 5, image 1 de 2 LaCie Rugged USB-C Circuit Board Replacement, Preparing for Drive Removal: étape 5, image 2 de 2

    • Push GENTLY on the back side of the hard drive.

    • DO NOT push more than is necessary to get the drive above the white plastic, as shown in the second picture.

    Modifier

  7. LaCie Rugged USB-C Circuit Board Replacement, Drive Removal: étape 6, image 1 de 1

    • Pull the drive gently out of the SATA connector.

    Modifier

  8. LaCie Rugged USB-C Circuit Board Replacement, Screw Removal: étape 7, image 1 de 1

    • Remove this Phillips 00 screw from the board.

    Modifier

  9. LaCie Rugged USB-C Circuit Board Replacement, Board Removal: étape 8, image 1 de 1

    • Slide the board out, making sure to keep any foam pieces intact.

    • Do not let any foam pieces get damaged. They are important.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Auteur

avec 1 autre contributeur

9021007

Membre depuis le 07/13/18

4 599 Réputation

25 tutoriels rédigés

Badges: 22

+ 19 badges supplémentaires

3 commentaires

Where can i get a new board? thank you

Bar Avraham - Réponse

Yes, where can we find a new board?

Vassilis Trigkas - Réponse

Right, where can the part be purchased?????

James Causey - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 13

30 derniers jours : 68

Total : 1,454