Réparez vos affaires Communauté Boutique

LeapFrog LeapPad Ultimate Camera Replacement

Introduction

A guide on how to replace the camera in a LeapFrog LeapPad Ultimate.

Ce dont vous avez besoin

  1. LeapFrog LeapPad Ultimate Camera Replacement, Back Panel: étape 1, image 1 de 2 LeapFrog LeapPad Ultimate Camera Replacement, Back Panel: étape 1, image 2 de 2

    • Flip over the Pad to its back side to begin the removal of the back panel.

    • Begin by removing the blue rim along the edge of the device. It runs along the green silicone lining.

    • This is very difficult to remove , so do be patient. To help remove the seal, both a metal spudger and plastic opening tool may be used.

    • Remove the pen from its place before starting to avoid tangling.

    Modifier

  2. LeapFrog LeapPad Ultimate Camera Replacement: étape 2, image 1 de 2 LeapFrog LeapPad Ultimate Camera Replacement: étape 2, image 2 de 2

    • Once the blue rim is removed, the 12 screws will be visible.

    • Use the Phillips #1 screwdriver to unscrew all 12 screws.

    Modifier

  3. LeapFrog LeapPad Ultimate Camera Replacement, Camera: étape 3, image 1 de 1

    • Remove the 3 screws on each corner of the motherboard

    Modifier

  5. LeapFrog LeapPad Ultimate Camera Replacement: étape 4, image 1 de 3 LeapFrog LeapPad Ultimate Camera Replacement: étape 4, image 2 de 3 LeapFrog LeapPad Ultimate Camera Replacement: étape 4, image 3 de 3

    • Remove the ribbon on the bottom of the motherboard and the ribbon on the left side of the motherboard.

    • There will be a small black switch on top of the ribbons that you must flip to take them out.

    Modifier

  6. LeapFrog LeapPad Ultimate Camera Replacement: étape 5, image 1 de 1

    • Remove the 3-pin connector on the top left side of the motherboard.

    Modifier

  7. LeapFrog LeapPad Ultimate Camera Replacement: étape 6, image 1 de 2 LeapFrog LeapPad Ultimate Camera Replacement: étape 6, image 2 de 2

    • Flip the motherboard to its back side and pinch the 2 green hooks to remove the camera cover

    Modifier

  8. LeapFrog LeapPad Ultimate Camera Replacement: étape 7, image 1 de 1

    • Remove the ribbon connecting the camera to the motherboard. You have now taken out the camera and can replace it with a new one.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Nabil Mustafa

Membre depuis le 09/21/18

223 Réputation

2 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

University of North Texas, Team S1-G13, Riccardelli Fall 2018 Membre de l'équipe University of North Texas, Team S1-G13, Riccardelli Fall 2018

UNT-RICCARDELLI-F18S1G13

4 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 207