Réparez vos affaires Communauté Boutique

LeapFrog LeapTV Controller Button Replacement

Introduction

This guide will show you how to replace the "A" and "B" buttons on the controller.

Ce dont vous avez besoin

  1. LeapFrog LeapTV Controller Button Replacement, Battery: étape 1, image 1 de 1

    • Use the Metal Spudger to push the release clip on the battery cover.

    Modifier

  2. LeapFrog LeapTV Controller Button Replacement: étape 2, image 1 de 1

    • Lift the cover off.

    Modifier

  3. LeapFrog LeapTV Controller Button Replacement: étape 3, image 1 de 1

    • The battery holder is now visible with the removal of the cover.

    Modifier

  4. LeapFrog LeapTV Controller Button Replacement, Buttons: étape 4, image 1 de 1

    • Use the screwdriver to remove the eight 8.7mm PH1 Phillips head screws.

    Modifier

  6. LeapFrog LeapTV Controller Button Replacement: étape 5, image 1 de 1

    • Slightly lift up on the back cover until the handle covers are free to rotate.

    Modifier

  7. LeapFrog LeapTV Controller Button Replacement: étape 6, image 1 de 1

    • Slide the the side of the handle facing you to the left to reveal the "A" and "B" button circuit board.

    Modifier

  8. LeapFrog LeapTV Controller Button Replacement: étape 7, image 1 de 1

    • Use the screwdriver to remove the three 8.5mm PH1 Phillips head screws.

    Modifier

  9. LeapFrog LeapTV Controller Button Replacement: étape 8, image 1 de 1

    • Lift up on the circuit board and move it to the side.

    • Be careful to not cause excess stress to the connecting wires when handling the circuit board. Excess stress can cause solder points to break.

    Modifier

  10. LeapFrog LeapTV Controller Button Replacement: étape 9, image 1 de 1

    • Use the plastic opening tool to release the buttons from the controller casing.

    Modifier

  11. LeapFrog LeapTV Controller Button Replacement: étape 10, image 1 de 1

    • Remove the "A" and "B" buttons by pulling up on one of the buttons.

    Modifier

  12. LeapFrog LeapTV Controller Button Replacement: étape 11, image 1 de 1

    • Buttons are now removed.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Triston Fischer

Membre depuis le 03/08/17

128 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

IUPUI, Team S4-G2, Baechle Spring 2017 Membre de l'équipe IUPUI, Team S4-G2, Baechle Spring 2017

IUPUI-BAECHLE-S17S4G2

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 346