Réparez vos affaires Communauté Boutique

LeapFrog LeapTV Controller Joy Stick Replacement

Introduction

This guide will show you how to replace the joy stick on the controller.

Ce dont vous avez besoin

  1. LeapFrog LeapTV Controller Joy Stick Replacement, Battery: étape 1, image 1 de 1

    • Use the Metal Spudger to push the release clip on the battery cover.

    Modifier

  2. LeapFrog LeapTV Controller Joy Stick Replacement: étape 2, image 1 de 1

    • Lift the cover off.

    Modifier

  3. LeapFrog LeapTV Controller Joy Stick Replacement: étape 3, image 1 de 1

    • The battery holder is now visible with the removal of the cover.

    Modifier

  4. LeapFrog LeapTV Controller Joy Stick Replacement, Controller Joy Stick: étape 4, image 1 de 1

    • Use the screwdriver to remove the eight 8.7 mm PH1 Phillips head screws.

    Modifier

  6. LeapFrog LeapTV Controller Joy Stick Replacement: étape 5, image 1 de 1

    • Separate the top and bottom parts of the controller slightly.

    Modifier

  7. LeapFrog LeapTV Controller Joy Stick Replacement: étape 6, image 1 de 1

    • Slide the cover on the back side of the controller covering the joy stick out of the way.

    Modifier

  8. LeapFrog LeapTV Controller Joy Stick Replacement: étape 7, image 1 de 1

    • Use the screwdriver to remove the four 8.7 mm PH1 Phillips head screws.

    Modifier

  9. LeapFrog LeapTV Controller Joy Stick Replacement: étape 8, image 1 de 1

    • Turn and lift the circuit board with button attacked out of the hole. Do not detach the circuit.

    Modifier

  10. LeapFrog LeapTV Controller Joy Stick Replacement: étape 9, image 1 de 1

    • Hold the circuit board and button and pull the button off.

    Modifier

  11. LeapFrog LeapTV Controller Joy Stick Replacement: étape 10, image 1 de 1

    • Joystick will now pop off.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Joshua Jones

Membre depuis le 03/23/17

101 Réputation

1 tutoriel rédigé

Badges: 2

Équipe

IUPUI, Team S4-G2, Baechle Spring 2017 Membre de l'équipe IUPUI, Team S4-G2, Baechle Spring 2017

IUPUI-BAECHLE-S17S4G2

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 4

Total : 750