Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

The purpose of this guide is to replace the LeapPad's battery. The battery is essential to receiving any form of functionality from the device. Without a working battery the device is powerless. Once the replacement is finished, be sure to properly dispose of the old battery at appropriate locations such as a batter recycling center.

  1. Remove the barcode covering the two screws on the lower back of the Leap Pad.
    • Remove the barcode covering the two screws on the lower back of the Leap Pad.

  2. Remove the two 5 mm screws that were covered by the sticker.
    • Remove the two 5 mm screws that were covered by the sticker.

  3. Fix Kits pour écrans LCD d'iPhone

    L'option économique couverte par notre garantie à vie.

    Acheter des kits

    Fix Kits pour écrans LCD d'iPhone

    Réduisez les coûts de réparation et non pas la qualité.

    Acheter des kits
  4. Using a plastic opening tool, pry off the outer protective child proof casing, starting from the bottom.
    • Using a plastic opening tool, pry off the outer protective child proof casing, starting from the bottom.

  5. Remove the 7 mm screw to the right of the cartridge dock, two 8 mm screws in the top left, and the nine 8 mm screws holding the the green shell.
    • Remove the 7 mm screw to the right of the cartridge dock, two 8 mm screws in the top left, and the nine 8 mm screws holding the the green shell.

  6. Remove the hard plastic casing, exposing the motherboard and battery.
    • Remove the hard plastic casing, exposing the motherboard and battery.

  7. The battery will be glued down, so use the flat end of the spudger to pry out the battery pack. Then using your fingers, grab the wire at the connection point and unplug the battery connector. Replace the battery with a new one. The battery will be glued down, so use the flat end of the spudger to pry out the battery pack. Then using your fingers, grab the wire at the connection point and unplug the battery connector. Replace the battery with a new one.
    • The battery will be glued down, so use the flat end of the spudger to pry out the battery pack. Then using your fingers, grab the wire at the connection point and unplug the battery connector. Replace the battery with a new one.

Conclusion

To reassemble the device, follow these instructions in reverse order.

6 autre(s) ont terminé cette réparation.

Ryan Arredondo

Membre depuis le 31/08/2015

231 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team 4-99, Meier Fall 2015 Membre de l'équipe USF Tampa, Team 4-99, Meier Fall 2015

USFT-MEIER-F15S4G99

4 membres

10 tutoriels rédigés

Hi Ryan, will removing the battery delete any of the downloaded apps and saved files?

Michael - Réponse

I’m not Ryan, but I just did this process and the apps and files are all still there.

Kivi Shapiro - Réponse

What is a spudger and where do I get a battery

P Mac - Réponse

Hello, if anyone still has this leappad Ultra and wanted to purchase a new battery. I have found a retail store https://batteryclerk.com/ The price is reasonable, and I'm just waiting for the batteries to arrive.

Mike Silva - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 3

7 derniers jours : 21

30 derniers jours : 148

Total : 12,221