Réparez vos affaires Communauté Boutique

Leica Z2X Lens Motor Replacement

Ce dont vous avez besoin

  1. Leica Z2X Lens Motor Replacement, Remove the Bottom Screws: étape 1, image 1 de 1

    • Carefully unscrew the four Phillips #0 screws on the bottom of the camera.

    • There is a screw located inside of the tripod hole (large circle.) Make sure the screw is removed from there too!

    Traduire

  2. Leica Z2X Lens Motor Replacement, Open the Back Door: étape 2, image 1 de 1

    • Open the back door on the camera by pushing down on the door latch.

    Traduire

  3. Leica Z2X Lens Motor Replacement, Remove the Bottom Plate: étape 3, image 1 de 1

    • Apply pressure to the bottom plate and it will pop off.

    • From here, you can replace the bottom plate, or continue on to further steps.

    Traduire

  4. Leica Z2X Lens Motor Replacement, Lens Motor: étape 4, image 1 de 1

    • Having opened the camera and removed the bottom plate, unscrew the five screws marked in the picture.

    • The screw marked in blue is a tiny bit harder to find because it's in a crevice. Don't miss it!

    Traduire

  5. Leica Z2X Lens Motor Replacement: étape 5, image 1 de 1

    • Apply pressure until the piece you unscrewed in the last step pops off.

    Traduire

  7. Leica Z2X Lens Motor Replacement: étape 6, image 1 de 1

    • Unscrew the four screws on the back of this piece to the lower-left corner of the lens.

    Traduire

  8. Leica Z2X Lens Motor Replacement: étape 7, image 1 de 1

    • Removing the lens motor cover, you should be left with these four pieces.

    Traduire

  9. Leica Z2X Lens Motor Replacement: étape 8, image 1 de 1

    • Located underneath these four pieces is the lens motor.

    Traduire

  10. Leica Z2X Lens Motor Replacement: étape 9, image 1 de 1

    • Now that you've removed the bottom plate, you can pull apart the front and back covers.

    • Start with the front cover and, by applying pressure (perhaps a lot of pressure), snap off the front cover.

    Traduire

  11. Leica Z2X Lens Motor Replacement: étape 10, image 1 de 1

    • Next, the back cover.

    • Apply pressure to remove the back plate.

    • Be careful of the buttons on the top of the camera falling off, they are small parts and CAN get lost easily.

    • The best way to remove the back is to stick your thumbs on either side of the battery socket and separate from there.

    Traduire

  12. Leica Z2X Lens Motor Replacement: étape 11, image 1 de 1

    • You should now have removed the front and back plates.

    Traduire

  13. Leica Z2X Lens Motor Replacement: étape 12, image 1 de 1

    • Remove the four screws holding on the front panel surrounding the lens.

    Traduire

  14. Leica Z2X Lens Motor Replacement: étape 13, image 1 de 1

    • Remove the three gears under the panel you removed in the last step and the lens motor should be able to be removed.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

Zachary

Membre depuis le 04/12/11

46 Réputation

2 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 18-19, Garner Spring 2011 Membre de l'équipe Cal Poly, Team 18-19, Garner Spring 2011

CPSU-GARNER-S11S18G19

4 membres

13 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 9

Total : 2,614