Introduction

USe this guide to replace the tripod socket.

Pièces

Aucune pièce nécessaire.

  1. Carefully unscrew the four (4) screws on the bottom of the camera. Make sure you don't miss the one that's actually in the tripod socket hole.
    • Carefully unscrew the four (4) screws on the bottom of the camera.

    • Make sure you don't miss the one that's actually in the tripod socket hole.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Open the back door on the camera by pushing down on the door latch.
    • Open the back door on the camera by pushing down on the door latch.

  4. Apply pressure to the bottom plate and it will pop off.
    • Apply pressure to the bottom plate and it will pop off.

    • From here, you can replace the bottom plate, or continue on to further steps.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Zachary

Membre depuis le 12/04/2011

31 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 18-19, Garner Spring 2011 Membre de l'équipe Cal Poly, Team 18-19, Garner Spring 2011

CPSU-GARNER-S11S18G19

4 membres

5 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 6

Total : 2,164