Aller au contenu principal

Introduction

This guide will show you how to remove and replace the fan cooling solution of the laptop if for some reason it has become faulty and needs replacement.

Pièces

Aucune pièce spécifiée.

  1. Using the Phillips #0 screwdriver, remove the (11) eleven 5.4 mm screws from the back panel. Using the Phillips #0 screwdriver, remove the (11) eleven 5.4 mm screws from the back panel.
    • Using the Phillips #0 screwdriver, remove the (11) eleven 5.4 mm screws from the back panel.

  2. Using a plastic opening tool, pull out the back panel from the laptop. Using a plastic opening tool, pull out the back panel from the laptop.
    • Using a plastic opening tool, pull out the back panel from the laptop.

  3. Using the Phillips #0 screwdriver, remove the (2) 5.4 mm screws. Disconnect the battery connector from the motherboard. Disconnect the battery connector from the motherboard.
    • Using the Phillips #0 screwdriver, remove the (2) 5.4 mm screws.

    • Disconnect the battery connector from the motherboard.

  4. Pull the battery outward and remove it from the rest of the laptop.
    • Pull the battery outward and remove it from the rest of the laptop.

  5. Batteries pour ordinateurs portables

    Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

    Acheter maintenant
  6. Remove the 5.4 mm Phillips #0 screw holding the Wireless Network Card. The network card will pop up by itself. The network card will pop up by itself.
    • Remove the 5.4 mm Phillips #0 screw holding the Wireless Network Card.

    • The network card will pop up by itself.

  7. Grab the network card and gently pull it out. Grab the network card and gently pull it out.
    • Grab the network card and gently pull it out.

  8. Pull out  the RAM metallic cover. Pull out  the RAM metallic cover.
    • Pull out the RAM metallic cover.

  9. Grab the black insulating tape  and pull it out. Grab the black insulating tape  and pull it out.
    • Grab the black insulating tape and pull it out.

  10. Using the Phillips #0 screwdriver, remove the (6) six fan screws from the device. (5) Five copper and (1) one silver Phillips #0 5.4mm screws.
    • Using the Phillips #0 screwdriver, remove the (6) six fan screws from the device.

    • (5) Five copper and (1) one silver Phillips #0 5.4mm screws.

    • Disconnect the fan from the motherboard.

  11. Unplug the Fan connector from its socket on the motherboard. Unplug the Fan connector from its socket on the motherboard.
    • Unplug the Fan connector from its socket on the motherboard.

  12. Carefully remove the fan from the laptop. Carefully remove the fan from the laptop.
    • Carefully remove the fan from the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Julian Escallon

Membre depuis le 27/09/2017

609 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S14-G1, Boczar Fall 2017 Membre de l'équipe USF Tampa, Team S14-G1, Boczar Fall 2017

USFT-BOCZAR-F17S14G1

4 membres

5 tutoriels rédigés

Looks like heat sink and fan are one unit. Advice for regular dust cleaning? How was the condition of the factory thermal paste?

cfryhover - Réponse

Where can one find this fan?

Gabriel Rivera - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 11

Total : 292