Introduction

The guide will show you how to remove the motherboard from the laptop. The process requires a lot of disarming, and a place to safely deposit screws is recommended.

Using the Phillips #0 screwdriver, remove the (11) eleven 5.4 mm screws from the back panel.
  • Using the Phillips #0 screwdriver, remove the (11) eleven 5.4 mm screws from the back panel.

Ajouter un commentaire

Using a plastic opening tool, pull out the back panel from the laptop.
  • Using a plastic opening tool, pull out the back panel from the laptop.

Ajouter un commentaire

  • Using the Phillips #0 screwdriver, remove the (2) 5.4 mm screws.

  • Disconnect the battery connector from the motherboard.

Ajouter un commentaire

  • Pull the battery outward and remove it from the rest of the laptop.

The removal of the hard drive isn’t completely necessary in order to access the hard drive for removal.

seattlehudson - Réponse

  • Using the Phillips #0 screwdriver, remove the (3) three 3 mm screws.

Ajouter un commentaire

  • Use a plastic opening tool as a lever to separate the hard drive from its casing .

The hard drive can also be slid backward from the connection. Then the clips will clear and can be easily lifted out. Additionally, it disconnects the hard drive at the same time. This also keeps from possibly breaking the clips or damaging the drive by prying.

seattlehudson - Réponse

  • Carefully, using your hand, remove the hard drive from the laptop.

Ajouter un commentaire

  • Remove the 5.4 mm Phillips #0 screw holding the Wireless Network Card.

  • The network card will pop up by itself.

Ajouter un commentaire

  • Grab the network card and gently pull it out.

Ajouter un commentaire

  • Pull out the RAM metallic cover.

Ajouter un commentaire

  • Grab the black insulating tape and pull it out.

Ajouter un commentaire

  • Using the Phillips #0 screwdriver, remove the (6) six fan screws from the device.

  • (5) Five copper and (1) one silver Phillips #0 5.4mm screws.

  • Disconnect the fan from the motherboard.

Ajouter un commentaire

  • Unplug the Fan connector from its socket on the motherboard.

Ajouter un commentaire

  • Carefully remove the fan from the laptop.

Ajouter un commentaire

  • Using the Phillips #0 screwdriver, remove the (2) two 5.4 mm Phillips screws.

  • Disconnect these connectors from the motherboard.

  • Disconnect the four ribbon cables from the motherboard.

  • Unscrew and remove the (2) two Phillips #0 screws.

Ajouter un commentaire

  • Lift up the black latch of the ribbon cable with the brown tab on top by holding the cable in to the motherboard.

  • Grab the tab with a pair of pliers and pull out the cable.

Ajouter un commentaire

  • Lift the beige latch of the ribbon cable with the blue tab by holding the cable in to the motherboard, and with a pair of tweezers, pull out the cable.

Ajouter un commentaire

  • Lift up the black latch of the ribbon cable with the blue tab at the lower right corner of the motherboard and disconnect it with a pair of tweezers.

  • Grab the tab and pull out the cable.

Ajouter un commentaire

  • Locate the last ribbon cable with a blue tab and lift the beige latch holding the cable in to the motherboard.

  • With a pair of tweezers grab the tab and remove the cable.

Ajouter un commentaire

  • Lift the black latch of the black connector at the top left corner of the motherboard by holding it in to the motherboard.

  • Grab the cable and pull it outwards to remove it.

Ajouter un commentaire

  • Pull the wire besides the brown tab ribbon cable out and disconnect it.

Ajouter un commentaire

  • Grab the small black connector by the RAM module and disconnect it from the motherboard.

Ajouter un commentaire

  • Unplug the remaining connector besides the RAM module and remove it from the motherboard.

Ajouter un commentaire

  • Gently grab the motherboard and pull it up lightly. Then pull it towards you and remove the motherboard.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Julian Escallon

Membre depuis le 27/09/2017

543 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S14-G1, Boczar Fall 2017 Membre de l'équipe USF Tampa, Team S14-G1, Boczar Fall 2017

USFT-BOCZAR-F17S14G1

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 5

30 derniers jours : 44

Total : 526