Lenovo IdeaPad 330S-14IKB RAM Replacement

Introduction

RAM is a part that does not typically fail, however it is not invulnerable. If your Lenovo Ideapad 330S-14IKB begins to show signs of failing RAM such as random freezes, blue screens, randomly rebooting, and files becoming corrupted, it could mean it is time to replace it.

Ce dont vous avez besoin

Étape 1 RAM

Lenovo IdeaPad 330S-14IKB RAM Replacement, RAM: étape 1, image 1 de 1

Begin by placing your laptop upside down so that you can see the labels on the back.

Modifier

Étape 2

Remove the 10 screws from the bottom of the laptop.
(Silver, 5.8mm Phillips #0)
Safely store these screws in a secure location, like a magnet pad, to prevent them from getting lost.

Modifier

Étape 3

Carefully remove the back panel from the laptop.
Be sure to proceed slowly and use wedges to avoid damaging the panel.

Modifier

Étape 4

Locate the black panel and remove these three black screws.
(Black, 5.83mm Phillips #0)

Modifier

Étape 5

To access your RAM, remove the black panel you just removed the screws from.
Remember to keep these screws separate and do not mix them with others.

Modifier

Étape 6

Your RAM will be a blue rectangle, positioned almost in the center of the device.

Modifier

Étape 7

To remove your RAM, gently pull back on the metal clips holding it in place.
Carefully slide the RAM out of the slot.
Be gentle to avoid damaging the slot

Modifier

Étape 8

Now, take your new RAM module and locate the notch on it.

Modifier

Étape 9

Align the notch on your replacement RAM as shown in the previous step with the corresponding slot on the device's RAM slot.

Modifier

Étape 10

Gently insert the RAM module.
Once it's as far in as it can go, lower it slowly until the metal clips lock it into place.
You should hear an audible click when it's securely in place.