Introduction

If the laptop begins to freeze up then it is a problem with the fan.

Pièces

Aucune pièce nécessaire.

  1. Flip laptop over so the model sticker is showing, and begin to unscrew all of the screws.
    • Flip laptop over so the model sticker is showing, and begin to unscrew all of the screws.

  2. Pop off the back panel using a plastic opening tool once all screws are removed.
    • Pop off the back panel using a plastic opening tool once all screws are removed.

    • Once the panel is fully removed, begin to unscrew the battery.

    • Use the iFixit Opening tool to disconnect the battery from the circuit board.

    • When all screws are removed from the battery, carefully lift the battery up.

    • The battery is completely removed, and can be replaced with a new battery.

    • Remove all screws securing the fan to the laptop.

    • Unhook the wire from the fan component using a spudger.

    • Now the fan is completely removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 10

Total : 45