Aller au contenu principal

Introduction

If the mouse is unresponsive on the screen then there is a problem with your touchpad.

Pièces

Aucune pièce spécifiée.

  1. Flip laptop over so the model sticker is showing, and begin to unscrew all of the screws.
    • Flip laptop over so the model sticker is showing, and begin to unscrew all of the screws.

  2. Pop off the back panel using a plastic opening tool once all screws are removed.
    • Pop off the back panel using a plastic opening tool once all screws are removed.

  3. Once the panel is fully removed, begin to unscrew the battery.
    • Once the panel is fully removed, begin to unscrew the battery.

  4. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  5. Use the iFixit Opening tool to disconnect the battery from the circuit board. When all screws are removed from the battery, carefully lift the battery up.
    • Use the iFixit Opening tool to disconnect the battery from the circuit board.

    • When all screws are removed from the battery, carefully lift the battery up.

  6. The battery is completely removed, and can be replaced with a new battery.
    • The battery is completely removed, and can be replaced with a new battery.

  7. After battery is removed, you will move to the touchpad.
    • After battery is removed, you will move to the touchpad.

  8. Before removing touchpad you will have to disconnect it from the circuit board using a nylon spudger.
    • Before removing touchpad you will have to disconnect it from the circuit board using a nylon spudger.

  9. Remove all the screws holding the touchpad down. Remove all the screws holding the touchpad down.
    • Remove all the screws holding the touchpad down.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 3

30 derniers jours : 14

Total : 98