Aller au contenu principal

Introduction

The network adapter is attached to the motherboard on this device. The back panel of the device must be removed to reach the adapter.

  1. Remove all of the screws on the back panel with a Phillips #000 screwdriver. Turn over the device and remove the two screws on the outside of the hinges. Turn over the device and remove the two screws on the outside of the hinges.
    • Remove all of the screws on the back panel with a Phillips #000 screwdriver.

    • Turn over the device and remove the two screws on the outside of the hinges.

  2. Use a  pry tool or iFixIt Opening tool to separate the back panel from the device. Lift the back panel straight up to remove.
    • Use a pry tool or iFixIt Opening tool to separate the back panel from the device.

    • Lift the back panel straight up to remove.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Remove the black and white wires that attach the fan to the network adapter. Remove the black and white wires that attach the fan to the network adapter. Remove the black and white wires that attach the fan to the network adapter.
    • Remove the black and white wires that attach the fan to the network adapter.

  5. Remove the two screws attaching the network adapter to the motherboard. Remove the network adapter by sliding it down out of its connector.
    • Remove the two screws attaching the network adapter to the motherboard.

    • Remove the network adapter by sliding it down out of its connector.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Rebekah Harmon

Membre depuis le 23/01/2018

108 Réputation

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 7

Total : 64