Réparez vos affaires Communauté Boutique

Lenovo Ideapad 110S-11IBR Thermal paste Replacement

Introduction

In this guide you will learn how to remove and replace the thermal compound for the Lenovo Ideapad 110s

Ce dont vous avez besoin

  1. Lenovo Ideapad 110S-11IBR Thermal paste Replacement, Battery: étape 1, image 1 de 1

    • Ensure that your device is completely OFF before performing this procedure.

    • Unscrew the eleven 4 mm Phillips #0 screws on the bottom of the device.

    Modifier

  2. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: étape 2, image 1 de 2 Lenovo Ideapad 110S-11IBR Thermal paste Replacement: étape 2, image 2 de 2

    • Separate the back lid from the laptop using a plastic opening tool.

    • Lift the back lid off of the device.

    Modifier

  3. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: étape 3, image 1 de 2 Lenovo Ideapad 110S-11IBR Thermal paste Replacement: étape 3, image 2 de 2

    • Remove the battery connector from its socket by pulling the cable away from the hinge using your fingers or a plastic opening tool.

    • Do not pull on the socket itself or you risk damaging the motherboard.

    • Remove the two pieces of tape that are holding the battery down.

    Modifier

  5. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: étape 4, image 1 de 1

    • Remove the five 4 mm Phillips screws securing the battery.

    Modifier

  6. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: étape 5, image 1 de 2 Lenovo Ideapad 110S-11IBR Thermal paste Replacement: étape 5, image 2 de 2

    • Lift the battery up and out of the device.

    Modifier

    • once the battery is removed unscrew the coldplate and pull it free from the mainboard.

    Modifier

    • Using Isopropyl alcohol and a microfiber cloth, wipe away the old thermal compound, make sure to clean the coldplate and CPU die.

    Modifier

    • apply about half a gram of non-conductive thermal compound to the heat spreader of the CPU and replace the coldplate pressing down gently.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

[deleted]

Membre depuis le 08/14/21

355 Réputation

1 tutoriel rédigé

Badges: 10

+ 7 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 195