Réparez vos affaires Communauté Boutique

Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement

Introduction

This guide aims to teach you how to replace the USB 2.0 and 3.5 mm headphone ports of the Lenovo Ideapad 110S-11IBR.

Ce dont vous avez besoin

  1. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement, Battery: étape 1, image 1 de 1

    • Ensure that your device is completely OFF before performing this procedure.

    • Unscrew the eleven 4 mm Phillips #0 screws on the bottom of the device.

    Modifier

  2. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: étape 2, image 1 de 2 Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: étape 2, image 2 de 2

    • Separate the back lid from the laptop using a plastic opening tool.

    • Lift the back lid off of the device.

    Modifier

  3. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: étape 3, image 1 de 2 Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: étape 3, image 2 de 2

    • Remove the battery connector from its socket by pulling the cable away from the hinge using your fingers or a plastic opening tool.

    • Do not pull on the socket itself or you risk damaging the motherboard.

    • Remove the two pieces of tape that are holding the battery down.

    Modifier

  5. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: étape 4, image 1 de 1

    • Remove the five 4 mm Phillips screws securing the battery.

    Modifier

  6. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: étape 5, image 1 de 2 Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: étape 5, image 2 de 2

    • Lift the battery up and out of the device.

    Modifier

  7. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement, USB & Headphone Jack PCB Board: étape 6, image 1 de 2 Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement, USB & Headphone Jack PCB Board: étape 6, image 2 de 2

    • Unscrew the three 4 mm Phillips screws.

    Modifier

  8. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: étape 7, image 1 de 2 Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: étape 7, image 2 de 2

    • Unlatch and remove the ribbon cable.

    • Ribbon cables can be fragile, so avoid excessively bending it.

    Modifier

  9. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: étape 8, image 1 de 1

    • Remove the card from the laptop.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Andrew Hollingsworth

Membre depuis le 09/20/17

133 Réputation

1 tutoriel rédigé

Badges: 4

+ 1 badge de plus

Équipe

University of North Texas, Team S6-G1, Thomas Fall 2017 Membre de l'équipe University of North Texas, Team S6-G1, Thomas Fall 2017

UNT-THOMAS-F17S6G1

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 1,662